5秒后页面跳转
TLC2543MDBREP PDF预览

TLC2543MDBREP

更新时间: 2024-11-06 04:28:11
品牌 Logo 应用领域
德州仪器 - TI 转换器模数转换器光电二极管输入元件
页数 文件大小 规格书
25页 388K
描述
12-BIT ANALOG-TO-DIGITAL CONVERTER WITH SERIAL CONTROL AND 11 ANALOG INPUTS

TLC2543MDBREP 技术参数

是否无铅:不含铅是否Rohs认证:符合
生命周期:Active零件包装代码:SSOP
包装说明:SSOP, SSOP20,.3针数:20
Reach Compliance Code:compliantECCN代码:3A001.A.2.C
HTS代码:8542.39.00.01Factory Lead Time:1 week
风险等级:0.7Is Samacsys:N
最大模拟输入电压:5.5 V最小模拟输入电压:
最长转换时间:10 µs转换器类型:ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码:R-PDSO-G20JESD-609代码:e4
长度:7.2 mm最大线性误差 (EL):0.0244%
湿度敏感等级:1模拟输入通道数量:11
位数:12功能数量:1
端子数量:20最高工作温度:125 °C
最低工作温度:-55 °C输出位码:BINARY, 2'S COMPLEMENT BINARY
输出格式:SERIAL封装主体材料:PLASTIC/EPOXY
封装代码:SSOP封装等效代码:SSOP20,.3
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, SHRINK PITCH
峰值回流温度(摄氏度):260电源:5 V
认证状态:Not Qualified采样速率:0.066 MHz
采样并保持/跟踪并保持:SAMPLE座面最大高度:2 mm
子类别:Analog to Digital Converters最大压摆率:2.5 mA
最小供电电压:4.5 V标称供电电压:5 V
表面贴装:YES技术:CMOS
温度等级:MILITARY端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.65 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:5.3 mmBase Number Matches:1

TLC2543MDBREP 数据手册

 浏览型号TLC2543MDBREP的Datasheet PDF文件第2页浏览型号TLC2543MDBREP的Datasheet PDF文件第3页浏览型号TLC2543MDBREP的Datasheet PDF文件第4页浏览型号TLC2543MDBREP的Datasheet PDF文件第5页浏览型号TLC2543MDBREP的Datasheet PDF文件第6页浏览型号TLC2543MDBREP的Datasheet PDF文件第7页 
TLC2543-EP  
12-BIT ANALOG-TO-DIGITAL CONVERTER  
WITH SERIAL CONTROL AND 11 ANALOG INPUTS  
www.ti.com  
SGLS125AJULY 2002REVISED NOVEMBER 2006  
FEATURES  
Controlled Baseline  
Programmable Power Down  
Programmable Output Data Length  
CMOS Technology  
One Assembly/Test Site, One Fabrication  
Site  
Extended Temperature Performance of –40°C  
to 125°C (TLC2543Q) and –55°C to 125°C  
(TLC2543M)  
(2)  
Application Report Available  
DW PACKAGE  
(TOP VIEW)  
Enhanced Diminishing Manufacturing Sources  
(DMS) Support  
AIN0  
AIN1  
AIN2  
AIN3  
AIN4  
AIN5  
AIN6  
AIN7  
AIN8  
GND  
V
CC  
1
2
3
4
5
6
7
8
9
10  
20  
19  
18  
17  
16  
15  
14  
13  
12  
11  
Enhanced Product Change Notification  
EOC  
(1)  
Qualification Pedigree  
I/O CLOCK  
DATA INPUT  
DATA OUT  
CS  
12-Bit-Resolution Analog-to-Digital Converter  
(ADC)  
10-µs Conversion Time Over Operating  
Temperature  
REF+  
REF−  
11 Analog Input Channels  
AIN10  
AIN9  
Three Built-In Self-Test Modes  
Inherent Sample-and-Hold Function  
Linearity Error . . . ±1 LSB Max  
On-Chip System Clock  
End-of-Conversion (EOC) Output  
Unipolar or Bipolar Output Operation (Signed  
Binary With Respect to 1/2 the Applied  
Voltage Reference)  
Programmable Most Significant Bit (MSB) or  
Least Significant Bit (LSB) First  
(1) Component qualification in accordance with JEDEC and  
industry standards to ensure reliable operation over an  
extended temperature range. This includes, but is not limited  
to, Highly Accelerated Stress Test (HAST) or biased 85/85,  
temperature cycle, autoclave or unbiased HAST,  
electromigration, bond intermetallic life, and mold compound  
life. Such qualification testing should not be viewed as  
justifying use of this component beyond specified  
performance and environmental limits.  
(2) Microcontroller Based Data Acquisition Using the TLC2543  
12-bit Serial-Out ADC (SLAA012)  
DESCRIPTION/ORDERING INFORMATION  
The TLC2543 is a 12-bit, switched-capacitor, successive-approximation, analog-to-digital converter (ADC). This  
device, with three control inputs [chip select (CS), input-output clock (I/O CLOCK), and address input (DATA  
INPUT)], is designed for communication with the serial port of a host processor or peripheral through a serial  
3-state output. The device allows high-speed data transfers from the host.  
In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel  
multiplexer that can select any 1 of 11 inputs or any 1 of 3 internal self-test voltages. The sample-and-hold  
function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that  
conversion is complete. The converter incorporated in the device features differential high-impedance reference  
inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise.  
A switched-capacitor design allows low-error conversion over the full operating temperature range.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2002–2006, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

TLC2543MDBREP 替代型号

型号 品牌 替代类型 描述 数据表
ADS7844E TI

类似代替

12 位 8 通道串行输出采样模数转换器 | DBQ | 20
ADS8344NB TI

类似代替

16-Bit, 8-Channel Serial Output Sampling
ADS8344E TI

类似代替

16-Bit, 8-Channel Serial Output Sampling

与TLC2543MDBREP相关器件

型号 品牌 获取价格 描述 数据表
TLC2543MEP TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTER WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543MFK TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543MJ TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543MJB TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543-Q1 TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543QDWREP TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTER WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543QDWRQ1 TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC2543QEP TI

获取价格

12-BIT ANALOG-TO-DIGITAL CONVERTER WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC254A TI

获取价格

LinCMOSE QUAD OPERATIONAL AMPLIFIERS
TLC254ACD TI

获取价格

LinCMOSE QUAD OPERATIONAL AMPLIFIERS