5秒后页面跳转
TJA1021T PDF预览

TJA1021T

更新时间: 2024-11-08 12:15:43
品牌 Logo 应用领域
恩智浦 - NXP /
页数 文件大小 规格书
25页 564K
描述
LIN 2.1/SAE J2602 transceiver

TJA1021T 数据手册

 浏览型号TJA1021T的Datasheet PDF文件第2页浏览型号TJA1021T的Datasheet PDF文件第3页浏览型号TJA1021T的Datasheet PDF文件第4页浏览型号TJA1021T的Datasheet PDF文件第5页浏览型号TJA1021T的Datasheet PDF文件第6页浏览型号TJA1021T的Datasheet PDF文件第7页 
TJA1021  
LIN 2.1/SAE J2602 transceiver  
Rev. 6 — 30 December 2010  
Product data sheet  
1. General description  
The TJA1021 is the interface between the Local Interconnect Network (LIN) master/slave  
protocol controller and the physical bus in a LIN. It is primarily intended for in-vehicle  
sub-networks using baud rates from 1 kBd up to 20 kBd and is LIN 2.1/SAE J2602  
compliant. The TJA1021 is pin-to-pin compatible with the TJA1020 with an improved  
ElectroStatic Discharge (ESD) specification.  
The transmit data stream of the protocol controller at the transmit data input (TXD) is  
converted by the TJA1021 into a bus signal with optimized slew rate and wave shaping to  
minimize ElectroMagnetic Emission (EME). The LIN bus output pin is pulled HIGH via an  
internal termination resistor. For a master application, an external resistor in series with a  
diode should be connected between pin INH or pin VBAT and pin LIN. The receiver detects  
the data stream at the LIN bus input pin and transfers it via pin RXD to the microcontroller.  
In Sleep mode, the power consumption of the TJA1021 is very low. In failure modes, the  
power consumption is reduced to a minimum.  
2. Features and benefits  
2.1 General  
LIN 2.1/SAE J2602 compliant  
Baud rate up to 20 kBd  
Very low ElectroMagnetic Emission (EME)  
High ElectroMagnetic Immunity (EMI)  
Passive behavior in unpowered state  
Input levels compatible with 3.3 V and 5 V devices  
Integrated termination resistor for LIN slave applications  
Wake-up source recognition (local or remote)  
Supports K-line like functions  
Pin-to-pin compatible with TJA1020  
2.2 Low power management  
Very low current consumption in Sleep mode with local and remote wake-up  
2.3 Protection mechanisms  
High ESD robustness: 6 kV according to IEC 61000-4-2 for pins LIN, VBAT and  
WAKE_N  
Transmit data (TXD) dominant time-out function  

与TJA1021T相关器件

型号 品牌 获取价格 描述 数据表
TJA1021T/10 NXP

获取价格

LIN 2.1/SAE J2602 transceiver
TJA1021T/10,112 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T/10,118 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T/10/C,112 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T/10/C,118 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T/20 NXP

获取价格

LIN 2.1/SAE J2602 transceiver
TJA1021T/20/C,112 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T/20/C,118 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T/20/CM,118 NXP

获取价格

TJA1021 - LIN 2.1/SAE J2602 transceiver SOIC 8-Pin
TJA1021T10 NXP

获取价格

LIN 2.1/SAE J2602 transceiver