5秒后页面跳转
TH8056 PDF预览

TH8056

更新时间: 2024-11-11 03:27:51
品牌 Logo 应用领域
迈来芯 - MELEXIS /
页数 文件大小 规格书
26页 714K
描述
Enhanced Single Wire CAN Transceiver

TH8056 数据手册

 浏览型号TH8056的Datasheet PDF文件第2页浏览型号TH8056的Datasheet PDF文件第3页浏览型号TH8056的Datasheet PDF文件第4页浏览型号TH8056的Datasheet PDF文件第5页浏览型号TH8056的Datasheet PDF文件第6页浏览型号TH8056的Datasheet PDF文件第7页 
TH8056  
Enhanced Single Wire CAN Transceiver  
Features  
‰
Fully compliant to GMW3089 V2.4 and J2411 Single Wire CAN specification for Class B  
in-vehicle communications  
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
Only 60 µA worst case sleep mode current independent from CAN voltage range  
Operating voltage range 5V to 26.5V  
Up to 40 kbps bus speed  
Up to 100 kbps high-speed transmission mode  
Logic inputs compatible with 3.3V and 5V supply systems  
Control pin for external voltage regulators  
Low RFI due to output wave shaping in normal and high voltage wake up mode  
Fully integrated receiver filter  
Bus terminals proof against short-circuits and transients in automotive environment  
Loss of ground protection, very low leakage current (typ. 20µA at 26.5V and 125°C)  
Protection against load dump, jump start  
Thermal overload and short circuit protection  
Under voltage lockout  
Bus dominant time-out feature  
Pb-Free 14-pin thermally enhanced and 8-pin SOIC package  
Ordering Information  
Part No.  
Temperature Range  
Package  
Revision  
TH8056 KDC A  
TH8056 KDC A8  
-40 to 125 °C  
-40 to 125 °C  
SOIC14  
SOIC8  
A
A
General Description  
The TH8056 is a physical layer device for a single wire data link capable of operating with various CSMA/CR protocols  
such as the Bosch Controller Area Network (CAN) version 2.0. This serial data link network is intended for use in  
applications where a high data rate is not required and a lower data rate can achieve cost reductions in both the physical  
media components and the microprocessor and/or dedicated logic devices that use the network.  
The network shall be able to operate in either the normal data rate mode or the high-speed data download mode for  
assembly line and service data transfer operations. The high-speed mode is only intended to be operational when the  
bus is attached to an off-board service node. This node shall provide temporary bus electrical loads which facilitate  
higher speed operation.  
The bit rate for normal communications is typically 33.33kbit/s, for high-speed transmissions as described above a typical  
bit rate of 83.33kbit/s is recommended. The TH8056 is designed in accordance with the Single Wire CAN Physical Layer  
Specification GMW3089 V2.4 and supports many additional features like under-voltage lock-out, time-out for faulty  
blocked input signals, output blanking time in case of bus ringing and a very low sleep mode current.  
TH8056 – Datasheet  
3901008056  
Page 1 of 26  
March 2007  
Rev 012  

与TH8056相关器件

型号 品牌 获取价格 描述 数据表
TH8056_12 MELEXIS

获取价格

Enhanced Single Wire CAN Transceiver
TH8056KDCA MELEXIS

获取价格

Enhanced Single Wire CAN Transceiver
TH8056KDCA8 MELEXIS

获取价格

Enhanced Single Wire CAN Transceiver
TH8056KDC-AAA-008-RE MELEXIS

获取价格

IC TXRX CAN 8SOIC
TH8056KDCAAA-008RE MELEXIS

获取价格

Enhanced Single Wire CAN Transceiver
TH8056KDC-AAA-008-SP MELEXIS

获取价格

IC TXRX CAN 8SOIC
TH8056KDC-AAA-008-TU MELEXIS

获取价格

IC TXRX CAN SGL WIRE 8SOIC
TH8056KDCAAA-008TU MELEXIS

获取价格

Enhanced Single Wire CAN Transceiver
TH8056KDC-AAA-014-RE MELEXIS

获取价格

IC TXRX CAN 14SOIC
TH8056KDCAAA-014RE MELEXIS

获取价格

Enhanced Single Wire CAN Transceiver