TGL200CU06 ... TGL200CU10
TGL200CU06 ... TGL200CU10
PPPM = 300 W
PM(AV) = 1.0 W
Tjmax = 150°C
VRRM = 600...1000 V
VBR = 200 V
Combination of Ultrafast Diode and TVS in SMD
Kombination von ultraschneller Diode und TVS in SMD
trr
~ 75 ns
Version 2020-04-15
Typical Applications
Primary side snubber circuit
in flyback converters
Typische Anwendungen
DO-213AA
Plastic MiniMELF
Primärseitige Schutzbeschaltung
in Sperrwandlern
Commercial grade 1)
Standardausführung 1)
Features
Besonderheiten
Zwei Bauteile in einem Gehäuse:
Ultraschnelle Sperrdiode und 200V
Spannungs-Begrenzer in Reihe
Hohe Leistungsfähigkeit
Two components in one package:
Ultrafast blocking diode and 200V
transient voltage suppressor in series
High power dissipation
Space saving
Platzsparend
R
Compliant to RoHS, REACH,
Conflict Minerals 1)
Konform zu RoHS, REACH,
Konfliktmineralien 1)
Pb
V
Mechanical Data 1)
Mechanische Daten 1)
Taped and reeled
Weight approx.
5000 / 7“
0.12 g
Gegurtet auf Rolle
Gewicht ca.
Case material
UL 94V-0
Gehäusematerial
Dimensions - Maße [mm]
Solder & assembly conditions
260°C/10s Löt- und Einbaubedingungen
MSL = 1
Ring = Voltage Suppressor /
Spannungsbegrenzer
Polarity
When a positive voltage is applied to the contact marked by a ring, a 200 V breakdown can be
measured. The ring does not specify the cathode of the blocking diode! Refer also to the aplication note
on the last page.
Polarität
Bei Anlegen einer positiven Spannung an den mit Ring gekennzeichneten Anschluss kann der 200V
Abbruch gemessen werde. Der Ring kennzeichnet nicht die Kathode der Sperrdiode! Bitte beachten Sie
hierzu auch den Applikationshinweis auf der letzten Seite.
Maximum ratings 2)
Grenzwerte 2)
Steady state power dissipation
Verlustleistung im Dauerbetrieb
1 W 3)
PM(AV)
Junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Tj
TS
-50...+150°C
-50...+150°C
Transient Voltage Suppressor
Spannungs-Begrenzer
Peak pulse power dissipation (10/1000 µs waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 µs)
PPPM
300 W 4)
Blocking diode
Sperrdiode
Repetitive peak reverse voltage
Periodische Spitzensperrspannung
TGL200CU06
TGL200CU08
TGL200CU10
600 V
800 V
1000 V
VRRM
1
Please note the detailed information on our website or at the beginning of the data book
Bitte beachten Sie die detaillierten Hinweise auf unserer Internetseite bzw. am Anfang des Datenbuches
TA = 25°C unless otherwise specified – TA = 25°C wenn nicht anders angegeben
Mounted on P.C. board with 25 mm2 copper pads at each terminal
2
3
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluss
Pulse shape see curve IPP = f (t) / PPP = f (t); repetition rate is limited by PM(AV)
4
Impulsform siehe Kurve IPP = f (t) / PPP = f (t); Wiederholrate begrenzt durch PM(AV)
© Diotec Semiconductor AG
http://www.diotec.com/
1