NOTES:
TFM-1XX-XX-XXX-X-XXX
REVISION EC
1. MINIMUM PUSHOUT FORCE TO BE 12 OZ RETENTION FOR CONTACTS AND WELD TABS.
2. COPLANARITY: .004[.10] = POS 02 THRU 26
.006[.15] = POS 27 THRU 50
OPTION
C1
No OF POSITIONS
-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,
SEE TABLE 1) (SEE FIG. 8 SHEET 3)
(NOT AVAILABLE FOR -RA OR -REX)
-LC: LOCKING CLIP (USE LC-05-TM)SEE NOTE 16
(NOT AVAILABLE FOR -RA OR -REX)
(SEE FIG. 10 SHEET 3) (SEE NOTE 13)
-P: PICK AND PLACE PAD (USE PPP-04)
(AVAILABLE IN ALL POSITIONS
EXCEPT -05 WITH -WT)
3. NOTE DELETED.
LEAD STYLE -01: (-02 THRU -50 ALL
EC
C
4.
REPRESENTS A CRITICAL DIMENSION.
POSITIONS AVAILABLE)
5. [ ] DIMENSIONS ARE IN MILLIMETERS.
LEAD STYLE -02: (-02 THRU -50 ALL
POSITIONS AVAILABLE)
DO NOT
SCALE FROM
THIS PRINT
6. MEASURED FROM BEND.
7. DIMENSION CHANGED PER REVISION AD.
ALL OTHER LEAD STYLES: (-5 THRU -50 MULTIPLES OF 5)
LEAD STYLES -11, -12 POS 12, 16, 17 ALSO AVAILABLE
LEAD STYLES -21, -22, -31, -32
CONTACT ENGINEERING FOR INFORMATION.
8. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT
THE -01 & -02 WILL BE SOLID, NOT RIBBED.
POS 12 AND 13 ALSO AVAILABLE
9. MEASURE FROM TIPS OF PIN.
(NOT AVAILABLE FOR -RA OR -REX,
SEE FIG. 7 SHEET 3)
10. NOTE DELETED.
LEAD STYLE
11. .003[.08] MAXIMUM TERMINAL BURR.
-RA: RIGHT ANGLE
THROUGH HOLE
-01, -03 (SEE FIG. 1)
-11, -13 (SEE FIG. 1)
-21,-23 (SEE FIG. 1)
-31 (SEE FIG. 1)
SURFACE MOUNT
12. .005 MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS.
13. MINIMUM LOCKING CLIP RETENTION TO BE 8 OZS.
14. THIS FEATURE ONLY PRESENT ON -01 &-02 LEAD STYLES.
15. AVAILABLE IN -05, -07, -10, -15, -20, -25 & -30 POS. ONLY.
16.DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION.
(AVAILABLE ONLY IN LEAD STYLE: -01
SEE FIG. 5, SHEET 2)
-02 (SEE FIG. 2)
-12 (SEE FIG. 2)
-22 (SEE FIG. 2)
-32 (SEE FIG. 2)
-TR: TAPE AND REEL (SEE FIG. 4, SHEET 5)
-SA: STAKED ALIGNMENT PIN (SEE FIG. 9,
SHEET 3)(NOT AVAILABLE FOR
-RA OR -RE)
PLATING SPECIFICATION
-K: POLYIMIDE FILM (SEE FIG. 3)
(NOT AVAILABLE FOR -RA OR -REX)
-WT: WELD TABS (USE WT-25-XX-T)
(AVAILABLE ON -01 AND -02 LEAD
STYLES ONLY) (SEE FIG. 6 SHEET 2)
-S: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
(No. OF POSITIONS x .050[1.27]) + .125[3.18] REF
(No. OF POSITIONS x .050[1.27]) + .025[.64] REF
-L: LIGHT SELECTIVE, 15 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-F: FLASH GOLD, 3 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
EC
(NOT AVAILABLE WITH -A, -LC,
-RA, OR -SA OPTIONS)
.110 2.79
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-RE1: RIGHT ANGLE ELEVATED .062 PCB
(USE TFM-XX-D-01-RE, NOT AVAILABLE
WITHOUT -WT, AVAILABLE IN LEAD
STYLE -01 ONLY, -05 THRU -50 POS)
(SEE FIG. 11, SHEET 4) (SEE NOTE 15)
-RE2: RIGHT ANGLE ELEVATED .093 PCB
(USE TFM-XX-D-01-RE, NOT AVAILABLE
WITHOUT -WT, AVAILABLE IN LEAD
STYLE -01 ONLY, -05 THRU -50 POS)
(SEE FIG. 11, SHEET 4) (SEE NOTE 15)
-SN: SOLDER NAIL FOR .062 BOARD
(TFM-XX-D-01-SN AND WT-27-01-T)
(SEE FIG.12, SHT 3)
REF
02
-LM: LIGHT SELECTIVE, 15 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
.155 3.94
REF
-FM: FLASH GOLD, 3 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-STL: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
TIN/LEAD (90/10+/-5%) TAIL
01
.075 1.91
REF
.050 1.27
REF
.225 5.72
REF
BODY SPECIFICATION
-D: DOUBLE ROW
SEE NOTE 14
(ONLY AVAILABLE WITH -02 LEAD STYLE)
(NOT AVAILABLE WITH OPTIONS -A, -LC,
-RA, -SA, -WT, -RE1 OR -RE2)
.050 1.27
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
C7
2 MAX TOE
(TYP)
-SN2: SOLDER NAIL FOR .093 BOARD
(TFM-XX-D-01-SN AND WT-27-02-T)
(SEE FIG.12, SHT 3)
.018 [0.46
.135 3.43 REF
2
MAX SWAY
(TYP)
"A"
(ONLY AVAILABLE WITH -02 LEAD STYLE)
(NOT AVAILABLE WITH OPTIONS -A, -LC,
-RA, -SA, -WT, -RE1 OR -RE2)
.096 2.44
.1635 4.153
(SEE NOTE 7)
"D" REF
REF
"A" REF
SEE NOTE 8
.010 0.25 REF
.014 0.36 REF
"C" +.004[.10]
-.002[.05]
"J" ± .003 [0.08]
"A"
C8
2
MAX SWAY (TYP)
C17
.050 1.27
C2
2
MAX TOE (TYP)
(No. OF POSITIONS x .050[1.27]) - .050[1.27]
C5
IN-PROCESS
FIGURE 1
THROUGH HOLE
-01, -03, -11, -13, -21, -23, -31
SECTION "A"-"A"
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR:
.050 X .050 TERMINAL STRIP
LCP, UL 94-VO
COLOR: BLACK
DWG. NO.
TFM-1XX-XX-XXX-X-XXX
TERMINAL: PHOSPHOR BRONZE
SHEET 1 OF 5
BY:
B RAY
7-10-2007
F:\DWG\MISC\MKTG\TFM-1XX-XX-XXX-X-XXX-MKT.SLDDRW
5秒后页面跳转
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
贸泽上架Tallysman TW5386智能GNSS天线
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
