F-219
™
TCSD
TIGER
TMM
.26" (6.6 mm)
TCSD–08–D–02.00–01–N–R
EYE
(2.00 mm) .0787"
TCSD SERIES
™
TIGER EYE IDC SOCKET CABLE
Mates with:
END
OPTION
NO. PINS
PER ROW
TYPE
STRIP
PLATING
OPTION
OTHER
OPTION
TMM, TMMH, STMM,
MMT, TW, MTMM, EHT,
ETMM (-SR), ZSTMM
LENGTH
01
N
SPECIFICATIONS
For complete specifications
see www.samtec.com?TCSD
–N
–04, –05,
–06, –07,
–“XX.XX”
= Notch Polarization
Insulator Material:
Black Glass Filled Polyester
Contact:
= Assembled Length
Assembled Length
in INCHES ( 1/8")
2 inches minimum
–08, –10, –12,
–13, –15, –17,
BeCu
Plating:
= Gold flash on contact
–F
Au or Sn over 50 µ" (1.27 µm) Ni
Wire:
Leave blank for standard plating:
30 µ" (0.76 µm) Gold on contact area
–20, –22, –25
28 AWG 7/36 Stranded,
Tinned, Copper with
Gray PVC Insulator
Current Rating (TCSD/STMM):
2.8 A per pin
(Standard sizes)
(2 pins powered)
Operating Temp Range:
-40 °C to +105 °C
Lead Size Accepted:
(0.48 mm) .019" to
(0.53 mm) .021"
Insertion Depth:
(2.87 mm) .113" to
(3.17 mm) .125"
RoHS Compliant:
Yes
–S
–D
–SR
–P “XX”
= Single End
= Double End
= Strain Relief
= Position Polarization
No. of positions x
(2.00) .0787 + (7.874) .3100
01
02
Not available with –O, –M,
–R, –DXX or –BXX
RECOGNITIONS
Specify “XX” as position
number. Same position
will be polarized on
both ends.
TCSD
For complete scope of
recognitions see
www.samtec.com/quality
= Socket Strip
–D “XX”
(3.17)
.125
(1.02)
.040
= Daisy Chain
1
FILE NO. E111594
01
“XX”
2"
min.
–B “XX”
1/8"
= Breakout
Double
Row
(4.00)
.158
Connectors
Specify “XX” as number of
conductors to be broken out.
Outer
Most
(End of
assembly)
No. of positions x (2.00) .0787 + (4.00) .157
(1.00) .039
4" minimum
4
ALSO AVAILABLE
(5.08)
.200
“XX”
(MOQ Required)
–R
• Other sizes
= Reversed
5"max.
2"min.
(2.00)
.0787
(2.00)
.0787
• Other platings
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
5
2
EJECTOR HEADERS &
LOCKING CLIPS
POLARIZING KEY
–M
= Middle Reverse
–RW
Specify PK-01-07 for
polarizing key (Available
in wheels of six each).
Also polarizes SMM
Series socket strips.
= Reverse Wiring
See TMM Series.
5
Requires –DXX
• Ejector headers
01
–O
• Locking clips
= Outside Reverse
• Strain relief option
02
Note:
Blue or black wire
See EHT Series.
TCSD Series assemblies are
non-standard, non-returnable.
opposite position #1.
3
Requires –DXX
5
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.