TC9200 Series
Indoor Cam era Mounts
n
n
n
n
n
n
Sturdy Construction
Attractive Appearance
Versatile Design
Adjustable
W ide Selection of Styles
Lightweight
The TC9200 Series Indoor Camera
Mounts can be used with CCD
cameras with fixed lenses.These
sturdy, attractive mounts have fully
adjustable mount heads and standard
1/4-20 camera mounting bolts.
Maximum load capability ranges from 2
kg (4.4 lb) to 10 kg (22 lb).These
versatile models can be used as
pedestal, wall, or ceiling mounts and
are well suited for use with CCD
cameras.
up to 10 kg (22 lb) in both the short
(10 lb) and is constructed of aluminum
and steel, providing extremely rigid
camera mounting. The TC9206U, a
150 mm (6 in) unit, is designed to be
used in either a suspended ceiling or
solid wall/ceiling mounting location.
Supplied with two mounting bases, it
can be easily adapted to either
configuration.
and the fully extended configurations
and features a quick release screw
head for ease of camera positioning.
The right angle curve in the support
arm of the TC9203 model mount can
accommodate many difficult mounting
requirements.A universal wall/ceiling
mount, this model has a length of 230
mm (9.1 in) and can handle cameras of
up to 10 kg (22 lb).
An economical general purpose mount,
the TC9207 model accommodates
loads of up to 4 kg (8.8 lb). It utilizes a
sleeve ball mounting clamp and comes
in an aluminum finish with an off-white
base flange.
Model TC9205 is an economical 127
mm (5 in) general purpose mount
which can handle loads of up to 2 kg
(4.4 lb).This mount features an
aluminum finish and an adjustable
sleeve ball mounting clamp.The two
mounting holes in the base flange
allow for direct mounting to a
standard electrical box (3 1/4 inch
centers) and an opening in its hollow
shaft permits a direct cable feed to
the mounting head from the base to
the camera.
Model TC9200 is an economical 200
mm (8 in) general purpose mount for
loads of up to 4 kg (8.8 lb). It has an
aluminum finish and an adjustable
sleeve ball mounting clamp for camera
position adjustments.
The LDH 6372/00 indoor mount is an
economical wall mount with a
minimum length of 63 mm and a
maximum length of 191 mm (2.5 in to
7.5 in). Featuring threaded extensions,
this unit can be configured to three
different lengths and is easily installed
with the included mounting hardware.
While designed originally for use with
the LDH series of CCD cameras, this
unit can also be used with many model
CCD cameras.
A deluxe general purpose mount, the
200 mm (8 in) TC9201 can handle
loads of up to 9 kg (20 lb) and has a
glossy black finish. It features a lever
type ball mounting clamp for quick and
easy adjustments of camera position.
The TC9202 model is an extendible
wall mount with a range of length
from 244 mm to 414 mm (9.6 in to
16.3 in). It can accommodate loads of
The TC9206U indoor mount is
configured for mounting 2/3 inch and
smaller cameras in indoor applications.
It accommodate loads of up to 4.5 kg
317