TC9205M
Preliminary Data Sheet
5-Port 10/100/1000 Smart Ethernet Switch
This feature allows improved support for
Features
multimedia applications.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Stand Alone Switch On A Chip
The chip embeds IEEE 802.3 MAC functions for
each port and these functions support full and half
duplex modes for both 10 and 100 Mbits/s data
rates and full duplex for 1000 Mbit/s. Each port
includes dedicated receive and transmit FIFOs
with necessary logic to implement flow control for
both full and half duplex modes. TC9205M uses
IEEE 802.3x frame based flow control for full
duplex and backpressure for half duplex.
5 Ethernet 10/100/1000 ports
I Ethernet 10/100 port
MII/GMII interface for 5 ports
I extra MII interface for 6th port
Four Classes of Service (CoS) selectable for
each port and/or checked via IP Header and
802.1Q VLAN Tag
ꢀ
ꢀ
Five port-based VLANs
Maximum throughput, non head-of-line
blocking architecture
TC9205M handles an 8K address-lookup table
with searching, self-learning, and automatic aging,
at very high speed and excellent address space
coverage. Forwarding rules are implemented
according to IEEE 802.1D specifications. Filtering
capabilities for bad packets and packets with
Reserved Group Address DA are also provided.
ꢀ
ꢀ
ꢀ
Embedded SSRAM packet buffer/address table
8K MAC address table
Each port is configurable to 10 full/half duplex,
100 full/half duplex and 1000 full duplex mode
Flow-control ability is able to set for both full
and half duplex mode
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Broadcast throttling
Port Mirroring
The pin configuration interface comprises 40
configurations, which are shared with GMII output
pins by latching the configuration data during
reset. An external EEPROM device can also be
used to configure the TC9205M at power-up. With
reference to pin configuration interface, the
EEPROM extends the chip’s configuration
capability with new features and enables a
jumper-less configuration mode using a parallel
interface for reprogramming. A virtual internal
EEPROM mode is also provided to enable the
use of the programming interface in the absence
of external EEPROM. TC9205M can make
effective use by most of its features using only the
pin configuration interface.
Serial EEPROM Interface, EEPROM is optional
MDIO master for PHY configuration / polling
0.18 micron technology
2V and 3.3V dual voltage power supply
Packaged in PBGA 292
25MHz crystal input only
General Description
TC9205M is a fully integrated 5 Port 10/100/1000
smart Ethernet switch controller designed for low
cost and high performance solutions. The chip
embeds necessary SSRAM for packet buffering
and MAC address table. It provides MII / GMII /
interface for all ports.
TC9205M includes a physical layer configuration /
polling entity, which it is use to configure the phy
functions and to monitor the physical layer
transceiver’s speed, duplex mode, link status and
full duplex flow control ability for each port. The
chip provides four modes for phy configurations,
which these modes include auto-negotiation
disable procedure for 10/100 speed modes. The
phy configuration information is stored in
EEPROM setting.
A store-and-forward switching method using a
non-blocking architecture is implemented within
TC9205M to improve the availability and
bandwidth. The chip embeds packet buffer, which
it supports normal and priority queues for each
transmission port.
TC9205M provides evolved CoS with four levels
of priority. The priority can be checked via layer 2
(802.1Q VLAN Tagging) and/or layer 3 (IP Header
TOS bits) packets. Port based priority is also
provided to ensure transmission with precedence
for all packets incoming from selected port(s).
The chip requires a 25 MHz system clock, dual 2V
and 3.3V power supply and is packaged in PBGA
292.
Confidential.
1/51
July 30, 2003
Copyright © 2003, IC Plus Corp.
TC9205M-DS-R03
5秒后页面跳转
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
PCF8574资料解读：主要参数分析、引脚说明
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
