TB67S112PG
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
VM power supply
Symbol
Rating
Unit
VM (max)
VOUT (max)
IOUT (max)
VIN(H) (max)
VIN(L) (max)
VOD (max)
IOD (max)
50
50
V
V
Output voltage (Note 3)
Output current (per one channel)
1.5
6.0
-0.4
6.0
20
A
V
Logic input voltage
V
ERR output pin voltage range
V
ERR output pin inflow current range
mA
1.47 (Note 1)
2.7 (Note 2)
Power dissipation
PD
W
Operating temperature
Storage temperature
Junction temperature
Topr
Tstg
-40 to 85
-55 to 150
150
°C
°C
°C
Tj (max)
Note 1: Standalone. When Ta exceeds 25°C, derating with 11.8 mW/°C is necessary.
Note 2: On PCB (size: 50 mm × 50 mm × 1.6 mm, Cu area: 50 %, single-side glass epoxy). When Ta exceeds 25°C,
derating with 21.6 mW/°C is necessary.
Note 3: OUT1 pin, OUT2 pin, and COM pin
Caution) Absolute maximum ratings
The absolute maximum ratings of a semiconductor device are a set of ratings that must not be exceeded, even for a
moment. Do not exceed any of these ratings. Exceeding the rating(s) may cause device breakdown, damage or
deterioration, and may result in injury by explosion or combustion. The value of even one parameter of the absolute
maximum ratings should not be exceeded under any circumstances. The device does not have overvoltage detection circuit.
Therefore, the device is damaged if a voltage exceeding its rated maximum is applied. All voltage ratings, including supply
voltages, must always be followed. The other notes and considerations described later should also be referred to.
Operating Range (Ta=-40 to 85°C)
Characteristics
Symbol
Test condition
Min
Typ.
Max
Unit
VM power supply voltage
Output voltage (Note 1)
Output current
VM
―
4.5
0
―
―
47
50
V
V
A
VOUT
IOUT
―
Ta=25°C, per one channel
―
0.75
1.5
Note:
Please use the device with extra margin regarding the absolute maximum ratings. Moreover, please pay
attention to the thermal conditions enough during use.
Note 1: OUT1 pin, OUT2 pin, and COM pin
7
2019-07-08