TB67S128FTG
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB67S128FTG
CLOCK-in and Serial controlled Bipolar Stepping Motor Driver
1. Outline
The TB67S128FTG is a two-phase bipolar stepping motor driver using a
PWM chopper. The clock in decoder is built in.
Fabricated with the BiCD process, output rating is 50 V/5.0 A (Motor
supply voltage = 44 V).
2. Features
P-VQFN64-0909-0.50-006
Weight: 0.229 g (typ.)
BiCD process integrated monolithic IC.
Capable of controlling 1 bipolar stepping motor.
PWM controlled constant-current drive
Low on-resistance (High + Low side = 0.25 Ω (typ.))
MOSFET output stage.
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, and 1/128 step operation.
High efficiency motor current control mechanism (ADMD: Advanced Dynamic Mixed Decay)
Built-in Anti-stall architecture (AGC: Active Gain Control)
Built-in Sense resistor less current control architecture (ACDS: Advanced Current Detection System)
High voltage and current (For specification, please refer to absolute maximum ratings and operating ranges)
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), Power-on-reset (POR), motor load open
(OPD)).
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistance and capacitor.
Small package with thermal pad
TB67S128FTG: P-VQFN64-0909-0.50-006
Note: Please be careful about thermal conditions during using.
© 2018-2021
Toshiba Electronic Devices & Storage Corporation
1
2021-09-07