Datasheet > TB67S511FTAG

TB67S511FTAG

更新时间： 2024-11-19 14:57:59

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

TB67S511FTAG 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	HVQCCN, LCC36,.25SQ,20	Reach Compliance Code：	unknown
风险等级：	5.74	其他特性：	ALSO REQUIRE MOTOR SUPPLY FROM 10V TO 35V
模拟集成电路 - 其他类型：	STEPPER MOTOR CONTROLLER	JESD-30 代码：	S-XQCC-N36
长度：	6 mm	功能数量：	1
端子数量：	36	最高工作温度：	85 °C
最低工作温度：	-20 °C	最大输出电流：	2 A
封装主体材料：	UNSPECIFIED	封装代码：	HVQCCN
封装等效代码：	LCC36,.25SQ,20	封装形状：	SQUARE
封装形式：	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	峰值回流温度（摄氏度）：	NOT SPECIFIED
座面最大高度：	0.8 mm	最大供电电流 (Isup)：	5 mA
最大供电电压 (Vsup)：	5.25 V	最小供电电压 (Vsup)：	4.75 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	BCDMOS	温度等级：	OTHER
端子形式：	NO LEAD	端子节距：	0.5 mm
端子位置：	QUAD	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	6 mm	Base Number Matches：	1

TB67S511FTAG

TOSHIBA BiCD Integrated Circuit Silicon Monolithic

TB67S511FTAG

Phase-in controlled Bipolar Stepping Motor Driver

The TB67S511FTAG is a two-phase bipolar stepping motor driver using a

PWM chopper. An interface is phase-in control.

Fabricated with the BiCD process, rating is 40 V/2.0 A.

Features

P-WQFN36-0606-0.50-002

Weight: 0.10 g (typ.)

•

Monolithic IC integrated by BiCD process

Capable of controlling bipolar stepping motor by single IC

PWM controlled constant-current drive

Supporting full, half, and quarter step resolutions

Built-in output MOSFET with low ON resistance (Upper + Lower side = 0.8 Ω (typ.))

High voltage and current drive (For specifications, please refer to the absolute maximum ratings and the

operation ranges)

•

Built-in output functions of error detection (TSD and ISD) flags

Built-in error detection circuits (Thermal shutdown (TSD), over-current detection circuit (ISD), and power-on

reset (POR))

•

Built-in VCC regulator for internal circuit drive

Chopping frequency of a motor can be customized by external components

Package: P-WQFN36-0606-0.50-002

Note: Please be careful about thermal conditions during use.

2016-12-08

12 3 4 5 6 7...23

中文翻译

下载PDF