TB67S261FTG
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB67S261FTG
CLOCK-in controlled Bipolar Stepping Motor Driver
The TB67S261 is a two-phase bipolar stepping motor driver
using a PWM chopper. An interface is PHASE in control.
Fabricated with the BiCD process, rating is 50 V/2.0 A .
FTG
Features
・BiCD process integrated monolithic IC.
・Capable of controlling 1 bipolar stepping motor.
・PWM controlled constant-current drive.
・Allows full, half, quarter step operation.
・Low on-resistance (High + Low side=0.8Ω(typ)) MOSFET
output stage.
P-WQFN48-0707-0.50-003
Weight 0.10g (typ.)
・High efficiency motor current control mechanism (Advanced
Dynamic Mixed Decay)
・High voltage and current (For specification, please refer to absolute
maximum ratings and operation ranges)
・Error detection (TSD/ISD) signal output function
・Built-in error detection circuits (Thermal shutdown (TSD), over-current
shutdown (ISD), and power-on reset (POR))
・Built-in VCC regulator for internal circuit use.
・Chopping frequency of a motor can be customized by external resistance
and capacitor.
・package
TB67S261FTG: P-WQFN48-0707-0.50-003
Note) Please be careful about thermal conditions during use.
©2015 TOSHIBA CORPORATION
1
2015-6-3