5秒后页面跳转
T6C63 PDF预览

T6C63

更新时间: 2024-09-16 21:18:39
品牌 Logo 应用领域
东芝 - TOSHIBA /
页数 文件大小 规格书
9页 336K
描述
T6C63

T6C63 技术参数

生命周期:Active包装说明:, TAB,270PINS
Reach Compliance Code:unknown风险等级:5.63
显示模式:SEGMENT底板数:0-BP
区段数:240端子数量:270
最高工作温度:70 °C最低工作温度:-20 °C
封装主体材料:PLASTIC/EPOXY封装等效代码:TAB,270PINS
电源:3/5 V认证状态:Not Qualified
子类别:Other Interface ICs最大压摆率:5 mA
表面贴装:YES技术:CMOS
温度等级:COMMERCIAL端子节距:1.27 mm
Base Number Matches:1

T6C63 数据手册

 浏览型号T6C63的Datasheet PDF文件第2页浏览型号T6C63的Datasheet PDF文件第3页浏览型号T6C63的Datasheet PDF文件第4页浏览型号T6C63的Datasheet PDF文件第5页浏览型号T6C63的Datasheet PDF文件第6页浏览型号T6C63的Datasheet PDF文件第7页 
T6C63  
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC  
T6C63  
COLUMN DRIVER FOR A DOT MATRIX LCD  
The T6C63 is a 240-channel-output column driver for an STN dot  
matrix LCD.  
The T6C63 features a 42-V LCD drive voltage and a 20-MHz maximum  
operating frequency. The T6C63 is able to drive LCD panels with a duty  
ratio of up to 1 / 480.  
It is recommended for use with the T6C14.  
FEATURES  
Display duty application  
LCD drive signal  
Data transfer  
: to 1 / 480  
: 240  
: 8-bit bidirectional  
Operating frequency  
: 20 MHz (V  
= 4.5 V)  
DD  
12.5 MHz (V  
DD  
= 2.7 V)  
LCD drive voltage  
Power supply voltage  
Operating temperature  
: 14 to 42 V (max 45 V)  
: 2.7 to 5.5 V  
: 20 to 75°C  
LCD drive output resistance : 700(typ.), 1200(max) (20 V, 1 / 13 bias)  
Display-off function  
Low power consumption  
: When / DSPOF is L, all LCD drive outputs (O1 to O240) remain at the V level.  
5
: Cascade connection and auto enable transfer functions are available.  
000707EBE1  
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general  
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the  
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and  
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or  
damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the  
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling  
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..  
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal  
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are  
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or  
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy  
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control  
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document  
shall be made at the customer’s own risk.  
Polyimide base film is hard and thin. Be careful not to injure yourself on the film or to scratch any other parts with the film. Try to  
design and manufacture products so that there is no chance of users touching the film after assembly, or if they do , that there is no  
chance of them injuring themselves. When cutting out the film, try to ensure that the film shavings do not cause accidents. After use,  
treat the leftover film and reel spacers as industrial waste.  
Light striking a semiconductor device generates electromotive force due to photoelectric effects. In some cases this can cause the  
device to malfunction.  
This is especially true for devices in which the surface (back), or side of the chip is exposed. When designing circuits, make sure  
that devices are protected against incident light from external sources. Exposure to light both during regular operation and during  
inspection must be taken into account.  
The products described in this document are subject to the foreign exchange and foreign trade laws.  
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by  
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its  
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or  
others.  
The information contained herein is subject to change without notice.  
2000-12-05 1/9  

与T6C63相关器件

型号 品牌 获取价格 描述 数据表
T6C63(3NS) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC270, DIE-270, Display Driver
T6C63(UAN) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC270, DIE-270, Display Driver
T6C71 TOSHIBA

获取价格

T6C71
T6C72A(UAN) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC142, TCP-142, Display Driver
T6C72A(UAN,3NS) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC142, TCP-142, Display Driver
T6C72A(UDM) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC142, TCP-142, Display Driver
T6C84 TOSHIBA

获取价格

COLUMN AND ROW DRIVER LSI FOR A DOT MATRIX GRAPHIC LCD
T6C86A(UAM) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC122, BUMP, TCP-122, Display Driver
T6C86B TOSHIBA

获取价格

IC,LCD DISPLAY DRIVER,80-SEG,18-BP,CMOS,TAB,122PIN
T6C86B(UAM) TOSHIBA

获取价格

IC LIQUID CRYSTAL DISPLAY DRIVER, UUC122, BUMP, TCP-122, Display Driver