SY89809L
3.3V 1:9 High-Performance, Low-Voltage
Bus Clock Driver
General Description
The SY89809L is a High-Performance Bus Clock Driver
with 9 differential HSTL (High-Speed Transceiver Logic)
output pairs. The part is designed for use in low-voltage
(3.3V/1.8V) applications, which require a large number of
outputs to drive precisely aligned, ultra-low skew signals to
their destination. The input is multiplexed from either HSTL
or LVPECL (Low-Voltage Positive-Emitter-Coupled Logic)
by the CLK_SEL pin. The Output Enable (OE) is
synchronous so that the outputs will only be
enabled/disabled when they are already in the LOW state.
This avoids any chance of generating a runt clock pulse
when the device is enabled/disabled as can happen with
an asynchronous control.
Precision Edge®
Features
• 3.3V core supply, 1.8V output supply for reduced power
• LVPECL and HSTL inputs
• 9 differential HSTL (low-voltage swing) output pairs
• HSTL outputs drive 50Ω-to-ground with no offset voltage
• 500MHz maximum clock frequency
• Low part-to-part skew (200ps max.)
• Low pin-to-pin skew (50ps max.)
• Available in 32-pin TQFP
The SY89809L features low pin-to-pin skew (50ps max.)
and low part-to-part skew (200ps max.)—performance
previously unachievable in a standard product having such
a high number of outputs. The SY89809L is available in a
single space saving package, enabling a lower overall cost
solution.
Applications
• High-performance PCs
• Workstations
• Parallel processor-based systems
• Other high-performance computing
• Communications
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Level
Direction Signal
Logic Symbol
HSTL
Input
Output
Input
Input
HSTL_CLK, /HSTL_CLK
HSTL
Q0 – Q8, /Q0 – /Q8
LVPECL
LVCMOS/LVTTL
LVPECL_CLK, /LVPECL_CLK
CLK_SEL, OE
Table 1. Signal Groups
OE(1) CLK_SEL
Q0 – Q8
LOW
/Q0 – /Q8
0
0
1
1
0
1
0
1
HIGH
LOW
HIGH
HSTL_CLK
/HSTL_CLK
LVPECL_CLK /LVPECL_CLK
Table 2. Truth Table
Note:
1. The OE (output enable) signal is synchronized with the low level of
the HSTL_CLK and LVPECL_CLK signal.
Precision Edge is a registered trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-121409-D
December 2009
hbwhelp@micrel.com or (408) 955-1690