SY89538L
3.3V Precision LVPECL and LVDS
Programmable Multiple Output Bank Clock
Synthesizer and Fanout Buffer with Zero Delay
General Description
The SY89538L integrated programmable clock
synthesizer and fanout is part of a precision PLL-
based clock generation family optimized for
enterprise switch, router, and multiprocessor server
applications. This family is ideal for generating
internal system timing requirements up to 750MHz for
multiple ASICs, FPGAs, and NPUs. These devices
integrate the following blocks into a single monolithic
IC:
Precision Edge®
Features
• Integrated programmable synthesizer with multiple
output dividers, fanout buffers, and clock drivers
• Zero-delay capability: 29.375MHz to 756MHz
• Reference clock input: 9.325MHz to 756MHz
•
•
•
•
•
•
•
PLL (Phase-Lock-Loop) based synthesizer
Zero-delay MUX and feedback capability
1:4 LVPECL fanout
• Input MUX accepts a reference and a crystal
(XTAL) source
– Ideal for reference backup clock source or
system test frequency source
– Patent-pending unique input MUX isolates XTAL
and reference inputs which minimizes crosstalk
1:3 LVDS fanout
Clock generator (dividers)
• Guaranteed AC performance:
– Output frequency range: 29.375MHz to 756MHz
– <150psPP total jitter
Logic translation (LVPECL, LVDS)
Five-independently programmable output
banks
– <6psRMS cycle-to-cycle jitter (XTAL Input)
– <8psPP deterministic jitter
This level of integration minimizes additive jitter and
part-to-part skew associated with discrete
– <0.7psRMS crosstalk induced jitter
– <75ps output-to-output skew
• TTL/CMOS-compatible control logic
alternatives, resulting in superior system-level timing
with reduced board space and power. For
applications that do not require a zero-delay function,
see the SY89537L.
• Five-independently programmable output
All support documentation can be found on
Micrel’s web site at: www.micrel.com.
frequency banks:
– Four differential LVPECL output banks
– One differential LVDS output bank with three
output pairs
• Output bank synchronization control pin
• Output enable
Applications
• Enterprise routers, switches, servers and
workstations
• Parallel processor-based systems
• 3.3V ±10% power supply (2.5V output capable)
• Internal system clock generation for ASICs, NPUs
• Guaranteed over the industrial temperature range
and FPGAs
(-40°C to +85°C)
• Available in a 64-pin EPAD-TQFP
Markets
• LAN/WAN
• Enterprise servers
• Test and measurement
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-101105-B
hbwhelp@micrel.com or (408) 955-1690
October 2005