Datasheet > SSC022BAA

SSC022BAA

更新时间： 2024-09-14 09:05:43

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
1页	162K
描述
Specification Grade Discrete Plug-in

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SSC022BAA 技术参数

生命周期：	Active	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8536.41.00.20
风险等级：	5.56	最大可调时间延迟：	3 s
最小可调时间延迟：	0.1 s	主体宽度：	50 mm
主体高度：	83 mm	主体长度或直径：	50 mm
线圈功率：	3000 mW	最大线圈电压（交流）：	240 V
触点（交流）最大额定R负载：	10A@120VAC	最大触点电流（交流）：	10 A
最大触点电流（直流）：	10 A	触点（直流）最大额定R负载：	10A@28VDC
最大触点电压（交流）：	120 V	最大触点电压（直流）：	28 V
触点/输出电源类型：	AC/DC	电气寿命：	500000 Cycle(s)
安装特点：	SOCKET MOUNT	最高工作温度：	65 °C
最低工作温度：	-30 °C	物理尺寸：	50mm X 50mm X 83mm
参考标准：	CSA	继电器动作：	MOMENTARY
继电器功能：	DPDT	继电器类型：	OFF-DELAY RELAY
表面贴装：	NO	端接类型：	SNAP-ON
Base Number Matches：	1

SSC022BAA 数据手册

Catalog 1308242

Issued 3-03 (PDF Rev. 4-04)

AGASTAT

SSC series

Specification Grade Discrete Plug-in

Tim e Delay Relay

• On-Delay, Off-Delay and Interval timing modes

• 13 timing ranges from 0.1 sec. to 60 min.

• 10A DPDT output contacts

• Escellent repeatability of ±1% or better.

• Exceptional immunity to transients and noise.

• Wide operating temperature range.

File LR29186

Users should thoroughly review the technical data before selecting a product part

number. It is recommended that user also seek out the pertinent approvals files of

the agencies/laboratories and review them to ensure the product meets the

requirements for a given application.

Input Data @ 25°C

Tim ing Modes

Voltage: See Ordering Information section for details.

Pow er Requirem ent: 3W, max.

On-Delay, Off-Delay and Interval.

Transient Protection: Non-repetitive transients of the following magni-

tudes will not cause spurious operation of affect function and accuracy.

Tim ing Specifications

Tim ing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.1 to 10 / 0.33 to 10 / 1 to 30 / 4

to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10

hr. (All are +10% , –1% of maximum values).

Tim ing Adjustm ent: Knob or fixed time (internal fixed resistor) – all models;

customer supplied external potentiometer or resistor

– On-Delay and Interval models only.

Operating Voltage

12VDC

24VAC/VDC

48 VAC/VDC

120 VAC/VDC

240VAC

<0.1 m s

1,000V

3,000V

<1 m s

240V*

480V*

2,500V*

Accuracy: Repeat Accuracy: ±1% ±0.004 sec. at any combination of

operating temperature and voltage.

* Minimum source impedance of 100 ohm.

Overall Accuracy: ±5.25% throughout operating temperature

and voltage ranges.

Environm ental Data

Reset Tim e: 25 ms. (minimum deenergized interval for on-delay or off-delay

models, or minimum required closure interval for interval

models without affecting accuracy.)

Tem perature Range: Storage: -40°C to +85°C.

Operating: -30°C to +65°C.

Relay Operate Tim e: Off-Delay mode only: 35 ms.

Relay Release Tim e: On-Delay mode only: 20 ms.

Mechanical Data

Mounting/Term ination: 8- or 11-pin octal type plug. 8-pin types fit either

27E122 or 27E891, while 11-pin types fit 27E123 or 27E892.

Weight: 4 oz. (112g) approximately.

Contact Data @ 25°C

Arrangem ents: 2 Form C (DPDT).

Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC.

Expected Mechanical Life: 10 million operations.

Expected Electrical Life: 500,000 operations, min., at rated resistive load.

Ordering Inform ation

SSC

Series SSC

Discrete

Industrial

Timer

Initial Dielectric Strength

Betw een Term inals and Case: 1,000VAC plus twice the nominal voltage

Output

2 = DPDT Relay

Timing Range

A =0 .1 to 3 sec.

B = 0.5 to 15 sec.

C = 1 to 30 sec.

D = 2 to 60 sec.

E = 4 to 120 sec.

F = 6 to 180 sec.

G = 10 to 300 sec.

I = 2 to 60 min.

K = 3 to 180 cycles

L = 0.33 to 10 min.

M = 0.5 to 15 min.

N = 1 to 30 min.

P = 0.1 to 10 min.

for one minute.

Outline Dim ensions

Operating Mode

01 = On-Delay

02 = Off-Delay

03 = Interval

.70

(18)

3.25

(83)

1.97

(50)

1.97

(50)

Wiring Diagram s (Bottom View s)

Operating Voltage

(+10%, –15%)

A = 120VAC, 50/60 Hz.

/ 120VDC

B = 240VAC, 50/60 Hz.

E = 24VAC, 50/60 Hz. /

24VDC

F = 48VAC, 50/60 Hz. /

48VDC

Q = 12VDC (±10%)

Timing Adjustment

A = Knob Adjust

B = External

Insulated, shielded two-

conductor cable similar

to Belden 8719, 8720 or

8769 required for leads

longer than 6 inches.

Max. permissble length

is 50 feet.

Potentiometer or

resistor (Operating

modes 1 and 3 only).

F = Fixed Times –

Specify time delay

in seconds per the

following examples:

F9.000 = 9 sec.

F99.00 = 99 sec.

F999.0 = 9999 sec.

F1000 = 1000 sec.

Off-Delay

Fixed or Knob

Adjust

On-Delay & Interval On-Delay & Interval

Authorized distributors are likely to stock the follow ing:

Fixed or Knob

Adjust

External Potentiom er

or Resistor Adjust

SSC12AAA

SSC12ABA

SSC12ACA

SSC12ADA

SSC12AGA

SSC12ALA.

Dimensions are shown for

reference purposes only.

Dimensions are in inches over

(millimeters) unless otherwise

specified.

Specifications and availability

subject to change.

www.tycoelectronics.com

Technical support:

Refer to inside back cover.

1234

中文翻译

下载PDF

与SSC022BAA相关器件

型号	品牌	获取价格	描述	数据表
SSC022EAA	TE	获取价格	Specification Grade Discrete Plug-in
SSC022FAA	TE	获取价格	Specification Grade Discrete Plug-in
SSC0301	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301_10	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301100YZF	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301100YZF-11	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301100YZF-22	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301100YZF-33	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301100YZF-44	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SSC0301100YZF-55	SUPERWORLD	获取价格	SMD POWER INDUCTORS

与SSC022BAA相关文章

SL74HC10N：高性能三输入与非门解析
2024-09-03

80
AIC1781A 电池充电控制器深度解析
2024-09-03

70
Pickering新高压舌簧继电器亮相汽车测试博览会
2024-08-26

100
采用MCU+MPU双处理器架构实现的创新应用设计探索
2024-08-23

116

产品中心

服务支持

精选活动

关于我们

帮助中心

SSC022BAA

SSC022BAA 技术参数

SSC022BAA 数据手册

与SSC022BAA相关器件

与SSC022BAA相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SSC022BAA

SSC022BAA 技术参数

SSC022BAA 数据手册

与SSC022BAA相关器件

与SSC022BAA相关文章

您还可以找

您在本页遇到什么问题？