NON-ISOLATED DC/DC CONVERTERS
2.4 Vdc - 5.5 Vdc Input
0.75 Vdc - 3.63 Vdc/16 A Output
SRBC-16F2Ax
RoHS Compliant
Rev.A
•
Non-Isolated
•
•
•
Under-voltage Lockout (UVLO)
Over Temperature Protection
Wide Input Range
•
•
•
•
•
High Efficiency
High Power Density
Fixed Frequency (300 kHz)
OCP/SCP
•
•
•
Wide Trim Range
Remote Sense
Flexible Output Voltage
Sequencing
Converter can sink and source
current
•
Remote On/Off
•
Active Low/High (Option)
Description
The Bel SRBC-16F2Ax modules are a series of non-isolated dc/dc converters that deliver up to 16 A of output
current with full load efficiency of 94% at 3.3 Vdc output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 Vdc to 3.63 Vdc over a wide range of input voltage (2.4 Vdc - 5.5
Vdc). These modules have a sequencing feature that enables designers to implement various types of output
voltage sequencing when powering multiple voltages on a board. The open-frame construction and small footprint
enable designers to develop cost and space-efficient solutions. Standard features include remote On/Off, remote
sense, over current protection, short current protection, wide input, and programmable output voltage.
Part Selection
Output
Input
Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Active Low
Model Number
Active High
Voltage
0.75 V -3.63 V1 2.4 V -5.5 V
16 A
58.1 W
94%
SRBC-16F2AL
SRBC-16F2A0
Notes: 1. These modules use a buck topology, so the output voltages must be 0.8 V less than the input voltage.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
3. Add “G” to the end of the Model Number to indicate Tray Packaging.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
5.8 V
Output Enable Terminal Voltage
Sequencing Voltage 1
-0.3 V
-0.3 V
-40 °C
-55 °C
-
-
-
-
5.8 V
Vin
Ambient Temperature
85 °C
125 °C
Storage Temperature
Notes: All specifications are typical at 25 °C unless otherwise stated.
1. SRBC-16F2Ax series of modules include a sequencing feature that enables users to implement
various types of output voltage sequencing in their applications. This is accomplished via an additional
sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin or leave the SEQ pin
floating.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com