ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
ꢈ
ꢉ
www.ti.com
SLLS554C − NOVEMBER 2002 − REVISED SEPTEMBER 2004
ꢈ
ꢊ
ꢈ
ꢄ
ꢅ
ꢇ
ꢋ
ꢆ
ꢄ
ꢆ
ꢌ
ꢍ
ꢀ
ꢀ
ꢇ
ꢍ
ꢎ
ꢁ
ꢏ
ꢀ
ꢐ
ꢎ
ꢏ
ꢆ
ꢑ
FEATURES
DESCRIPTION
D
High Speed 2x2 LVPECL Crosspoint Switch
The SN65LVCP23 is a 2x2 LVPECL crosspoint switch.
The dual channels incorporate wide common-mode (0 V
to 4 V) receivers, allowing for the receipt of LVDS,
LVPECL, and CML signals. The dual outputs are LVPECL
drivers to provide high-speed operation. The
SN65LVCP23 provides a single device supporting 2:2
buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2x2
switching, and LVDS/CML to LVPECL level translation on
each channel. The flexible operation of the SN65LVCP23
provides a single device to support the redundant serial
bus transmission needs (working and protection switching
cards) of fault-tolerant switch systems found in optical
networking, wireless infrastructure, and data commu-
nications systems. TI offers an additional gigibit repeater/
translator in the SN65LVDS101.
D
LVDS Crosspoint Switch Available in
SN65LVCP22
D
D
D
D
50 ps (Typ), of Peak-to-Peak Jitter
23
With PRBS = 2 –1 Pattern
Output (Channel-to-Channel) Skew Is 10 ps
(Typ), 50 ps (Max)
Configurable as 2:1 Mux, 1:2 Demux,
Repeater or 1:2 Signal Splitter
Inputs Accept LVDS, LVPECL, and CML
Signals
D
D
D
D
Fast Switch Time of 1.7 ns (Typ)
Fast Propagation Delay of 0.75 ns (Typ)
16 lead SOIC and TSSOP Packages
Operating Temperature: −40°C to 85°C
The SN65LVCP23 uses a fully differential data path to
ensure low-noise generation, fast switching times, low
pulse width distortion, and low jitter. Output
channel-to-channel skew is less than 10 ps (typ) and 50 ps
(max) to ensure accurate alignment of outputs in all
applications. Both SOIC and TSSOP package options are
available.
APPLICATIONS
D
Gigabit Ethernet Redundant Transmission
Paths
OUTPUTS OPERATING SIMULTANEOUSLY
D
Gigabit Interface Converters (GBICs)
1.3 Gbps
−1 PRBS
23
2
D
Fibre Channel Redundant Transmission
Paths
OUTPUT 1
V
=
=
3.3 V
1.2 V
CC
|V | = 200 mV, V
D
D
D
D
D
D
HDTV Video Routing
ID
IC
Vertical Scale = 400 mV/div
Base Stations
OUTPUT 2
Protection Switching for Serial Backplanes
Network Switches/Routers
Optical Networking Line Cards/Switches
Clock Distribution
650 MHz
Horizontal Scale = 200 ps
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
ꢇꢌ ꢍ ꢒꢓ ꢆ ꢏꢎ ꢍ ꢁ ꢒ ꢔꢏꢔ ꢕꢖ ꢗꢘ ꢙ ꢚꢛ ꢜꢕꢘꢖ ꢕꢝ ꢞꢟ ꢙ ꢙ ꢠꢖꢜ ꢛꢝ ꢘꢗ ꢡꢟꢢ ꢣꢕꢞ ꢛꢜꢕ ꢘꢖ ꢤꢛ ꢜꢠꢥ ꢇꢙ ꢘꢤꢟ ꢞꢜꢝ
ꢞ ꢘꢖ ꢗꢘꢙ ꢚ ꢜꢘ ꢝ ꢡꢠ ꢞ ꢕ ꢗꢕ ꢞ ꢛ ꢜꢕ ꢘꢖꢝ ꢡ ꢠꢙ ꢜꢦꢠ ꢜꢠ ꢙ ꢚꢝ ꢘꢗ ꢏꢠꢊ ꢛꢝ ꢎꢖꢝ ꢜꢙ ꢟꢚ ꢠꢖꢜ ꢝ ꢝꢜ ꢛꢖꢤ ꢛꢙ ꢤ ꢧ ꢛꢙ ꢙ ꢛ ꢖꢜꢨꢥ
ꢇꢙ ꢘ ꢤꢟꢞ ꢜ ꢕꢘ ꢖ ꢡꢙ ꢘ ꢞ ꢠ ꢝ ꢝ ꢕꢖ ꢩ ꢤꢘ ꢠ ꢝ ꢖꢘꢜ ꢖꢠ ꢞꢠ ꢝꢝ ꢛꢙ ꢕꢣ ꢨ ꢕꢖꢞ ꢣꢟꢤ ꢠ ꢜꢠ ꢝꢜꢕ ꢖꢩ ꢘꢗ ꢛꢣ ꢣ ꢡꢛ ꢙ ꢛꢚ ꢠꢜꢠ ꢙ ꢝꢥ
Copyright 2002−2003, Texas Instruments Incorporated