TMP320C40KGDC, SMJ320C40KGDC, TMP320C40KGDCT, SMJ320C40KGDCT
FLOATING-POINT DIGITAL SIGNAL PROCESSOR
KNOWN GOOD DIES
SGUS024C – MARCH 1997 – REVISED OCTOBER 2001
SMJ: QML Processing to MIL–PRF–38535
TMP: Commercial Level Processing
Operating Temperature Ranges:
– Military (M) –55°C to 125°C
– Commercial (C) –25°C to 85°C
– Commercial (L) 0°C to 70°C
Two Identical External Data and Address
Buses Supporting Shared Memory Systems
and High Data-Rate, Single-Cycle
Transfers:
– High Port-Data Rate of 100 MBytes/s
(Each Bus)
– 16G-Byte Continuous
Program/Data/Peripheral Address Space
– Memory-Access Request for Fast,
Intelligent Bus Arbitration
– Separate Address-, Data-, and
Control-Enable Pins
– Four Sets of Memory-Control Signals
Support Different Speed Memories in
Hardware
Fabricated Using Enhanced Performance
Implanted CMOS (EPIC ) Technology by
Texas Instruments (TI )
Highest Performance Floating-Point Digital
Signal Processor (DSP)
– ’C40-50:
40-ns Instruction Cycle Time:
50 MFLOPS, 25 MIPS, 275 MOPS,
320 MBps
– ’C40-40:
50-ns Instruction Cycle Time:
40 MFLOPS, 20 MIPS, 220 MOPS,
256 MBps
Six Communications Ports
6-Channel Direct Memory Access (DMA)
Coprocessor
Separate Internal Program, Data, and DMA
Coprocessor Buses for Support of Massive
Concurrent Input/Output (I/O) of Program
and Data Throughput, Maximizing
Sustained Central Processing Unit (CPU)
Performance
Single-Cycle Conversion to and From
IEEE-745 Floating-Point Format
Single Cycle 1/x, 1/
x
On-Chip Program Cache and
Source-Code Compatible With SMJ320C30
Validated Ada Compiler
Dual-Access/Single-Cycle RAM for
Increased Memory-Access Performance
– 512-Byte Instruction Cache
– 8K Bytes of Single-Cycle Dual-Access
Program or Data RAM
– ROM-Based Bootloader Supports
Program Bootup Using 8-, 16-, or 32-Bit
Memories Over Any One of the
Communications Ports
Single-Cycle 40-Bit Floating-Point,
32-Bit Integer Multipliers
12 40-Bit Registers, 8 Auxiliary Registers,
14 Control Registers, and 2 Timers
†
IEEE Standard 1149.1 Test-Access Port
(JTAG)
description
The TMP/SMJ320C40KGD DSP is a 32-bit, floating-point processor manufactured in 0.72-µm, double-level
metal CMOS technology. It is the fourth generation of DSPs from Texas Instruments, and it is the world’s first
DSP designed for parallel processing. The on-chip parallel processing capabilities of the ’C40 make the
floating-point performance required by many applications achievable and cost-effective.
The TMP/SMJ320C40 is the first DSP with on-chip communication ports for processor-to-processor
communication using simple communication software with no external hardware. This allows connectivity with
no external glue logic. The communication ports remove I/O bottlenecks, and the independent smart-DMA
coprocessor is able to handle the CPU I/O requirements.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
†
IEEE Standard 1149.1–1990 Standard Test-Access Port and Boundary-Scan Architecture
EPIC and TI are trademarks of Texas Instruments Incorporated.
Copyright 2001, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443