SM8S10A-AL thru SM8S43A-AL JIEJIE MICROELECTRONICS CO. , Ltd
Rev.3.2
Surface Mount Transient Voltage Suppressors
High temperature stability and high reliability conditions
FEATURES
Junction passivation optimized design passivated anisotropic
rectifier technology.
TJ=175℃capability suitable for high reliability and automotive
requirement.
Available in uni-directional polarity only.
Low leakage current.
Low forward voltage drop.
High surge capability.
Meets ISO16750-2 surge specification(varied by test
condition).
Meets MSL-1, per J-STD-020, LF maximum peak of 260℃.
AEC-Q101 qualified.
Compliant to RoHS directive 2011/65/EU and in accordance
to WEEE 2002/96/EC.
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VR
PPP (10/1000μs)
PPP (10/10000μs)
PD
10V to 43V
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application.
6600W
5200W
8W
MECHANICAL DATA
Case: DO-218AB
IFSM
700A
TJmax
175℃
Molding compound meets UL 94V-0 flammability rating
Base P/NHE3-RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per J-STD-002
Polarity
Uni-directional
DO-218AB
Package
MAXIMUM RATINGS(TC=25℃, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Value
6600
Unit
Watts
Watts
Watts
Amps
Amps
℃
Peak pulse power dissipation at 10/1000μs waveform
Peak pulse power dissipation at 10/10000μs waveform
Power dissipation on infinite heat sink at TC=25℃
Peak pulse current with 10/1000μs waveform
Peak forward surge current, 8.3ms single half sine-wave
Operating junction and storage temperature range
Typical thermal resistance, junction to case
Typical thermal resistance, junction to ambient
Note(1) Non-repetitive current pulse derated above TA=25℃
PPP
5200
PD
8.0
(1)
IPPM
IFSM
See next table
700
TJ ,TSTG
RθJC
-55 to +175
0.9
℃/W
℃/W
RθJA
12
TEL:+86-513-83639777
-1 / 6-
http://www.jjwdz.com