SM8S10 thru SM8S43A
Vishay General Semiconductor
www.vishay.com
Surface Mount PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design passivated
anisotropic rectifier technology
• TJ = 175 °C capability suitable for high reliability
and automotive requirement
• Available in uni-directional polarity only
• Low leakage current
• Low forward voltage drop
DO-218AB
• High surge capability
• Meets ISO7637-2 surge specification (varied by test
condition)
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VBR
11.1 V to 52.8 V
TYPICAL APPLICATIONS
P
PPM (10 x 1000 μs)
6600 W
5200 W
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting,
especially for automotive load dump protection application.
P
PPM (10 x 10 000 μs)
PD
8 W
VWM
10 V to 43 V
700 A
IFSM
MECHANICAL DATA
Case: DO-218AB
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ..., revision code only
applicable for part number with 5 % tolerance)
TJ max.
Polarity
Package
175 °C
Uni-directional
DO-218AB
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: heatsink is anode
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
6600
UNIT
with 10/1000 μs waveform
Peak pulse power dissipation
W
with 10/10 000 μs waveform
5200
Power dissipation on infinite heatsink at TC = 25 °C (fig. 1)
Peak pulse current with 10/1000 μs waveform
PD
8.0
W
A
(1)
IPPM
See next table
700
Peak forward surge current 8.3 ms single half sine-wave
Operating junction and storage temperature range
IFSM
A
TJ, TSTG
-55 to +175
°C
Note
(1)
Non-repetitive current pulse derated above TA = 25 °C
Revision: 31-Aug-16
Document Number: 88387
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000