SM8S12CA-AL thru SM8S43CA-AL JIEJIE MICROELECTRONICS CO. , Ltd
Rev.4.2
Surface Mount Transient Voltage Suppressors
High temperature stability and high reliability conditions
FEATURES
Junction passivation optimized design passivated anisotropic
rectifier technology.
TJ = 175℃capability suitable for high reliability and
automotive requirement.
Available in bi-directional polarity.
Low leakage current.
Low forward voltage drop.
High surge capability.
Meets ISO16750-2 surge specification(varied by test
condition).
DO-218AB
Meets MSL-1, per J-STD-020, LF maximum peak of 260℃.
AEC-Q101 qualified.
Compliant to RoHS directive 2011/65/EU and in accordance
to WEEE 2002/96/EC.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application.
PRIMARY CHARACTERISTICS
VR
PPP (10/1000μs)
PPP (10/10000μs)
PD
12V to 43V
6600W
5200W
MECHANICAL DATA
Case: DO-218AB
8W
TJmax
175℃
Molding compound meets UL 94V-0 flammability rating
Base P/NHE3-RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per J-STD-002
Polarity
Bi-directional
DO-218AB
Package
MAXIMUM RATINGS(TC=25℃, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Value
6600
Unit
Watts
Watts
Watts
Amps
℃
Peak pulse power dissipation at 10/1000μs waveform
Peak pulse power dissipation at 10/10000μs waveform
Power dissipation on infinite heat sink at TC=25℃
Peak pulse current with 10/1000μs waveform
Operating junction and storage temperature range
Typical thermal resistance, junction to case
Typical thermal resistance, junction to ambient
PPP
5200
PD
8.0
(1)
IPPM
TJ ,TSTG
RθJC
See next table
-55 to +175
0.9
℃/W
℃/W
RθJA
12
Note
(1) Non-repetitive current pulse derated above TA=25℃
TEL:+86-513-83639777
-1 / 6-
http://www.jjwdz.com