Datasheet > 微控制器和处理器 > 串行 IO/通信控制器> SC16C852V

SC16C852V

更新时间： 2024-11-02 04:05:31

品牌	Logo	应用领域
恩智浦 - NXP		先进先出芯片
页数	文件大小	规格书
54页	254K
描述
Dual UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

SC16C852V 数据手册

SC16C852V

1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared

(IrDA), and XScale VLIO bus interface

Rev. 03 — 15 October 2007

Product data sheet

1. General description

The SC16C852V is a 1.8 V, low power dual channel Universal Asynchronous Receiver

and Transmitter (UART) used for serial data communications. Its principal function is to

convert parallel data into serial data and vice versa. The UART can handle serial data

rates up to 5 Mbit/s. SC16C852V can be programmed to operate in extended mode where

additional advanced UART features are available (see Section 6.2). The SC16C852V

family UART provides enhanced UART functions with 128-byte FIFOs, modem control

interface, DMA mode data transfer, and IrDA encoder/decoder. On-board status registers

provide the user with error indications and operational status. System interrupts and

modem control features may be tailored by software to meet speciﬁc user requirements.

An internal loopback capability allows on-board diagnostics. Independent programmable

baud rate generators are provided to select transmit and receive baud rates.

The SC16C852V with Intel XScale processor VLIO interface operates at 1.8 V and is

available in HVQFN48 and TFBGA36 packages.

2. Features

I Dual channel high performance UART

I 1.8 V operation

I Advanced packages: HVQFN and TFBGA

I Up to 5 Mbit/s data rate at 1.8 V

I 128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU

I 128-byte receive FIFO with error ﬂags to reduce the bandwidth requirement of the

external CPU

I 128 programmable Receive and Transmit FIFO interrupt trigger levels

I 128 Receive and Transmit FIFO reporting levels (level counters)

I Automatic software (Xon/Xoff) and hardware (RTS/CTS or DTR/DSR) ﬂow control

I Programmable Xon/Xoff characters

I 128 programmable hardware and software trigger levels

I Automatic 9-bit mode (RS-485) address detection

I Automatic RS-485 driver turn-around with programmable delay

I Dual channel concurrent write

I UART software reset

I High resolution clock prescaler, from 0 to 15 with granularity of ¹⁄₁₆to allow

non-standard UART clock to be used

I Industrial temperature range (−40 °C to +85 °C)

I Software compatible with industry standard SC16C652B

12 3 4 5 6 7...54

中文翻译

下载PDF

与SC16C852V相关器件

型号	品牌	获取价格	描述	数据表
SC16C852V_08	NXP	获取价格	1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus
SC16C852VIBS	NXP	获取价格	Dual UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
SC16C852VIBS,515	NXP	获取价格	SC16C852V - 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and XSca
SC16C852VIET	NXP	获取价格	Dual UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
SC16C852VIET,151	NXP	获取价格	SC16C852V - 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and XSca
SC16C852VIET,515	NXP	获取价格	SC16C852V - 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and XSca
SC16C852VIET,557	NXP	获取价格	SC16C852V - 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and XSca
SC16DP-19	ETC	获取价格	Drop Wire Clamps for CATV and Telephone Cable
SC16DP-26	ETC	获取价格	Drop Wire Clamps for CATV and Telephone Cable
SC16DP-3Q	ETC	获取价格	Drop Wire Clamps for CATV and Telephone Cable

与SC16C852V相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

5
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

2
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

23
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

24

产品中心

服务支持

精选活动

关于我们

帮助中心

SC16C852V

SC16C852V 数据手册

与SC16C852V相关器件

与SC16C852V相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SC16C852V

SC16C852V 数据手册

与SC16C852V相关器件

与SC16C852V相关文章

您还可以找

您在本页遇到什么问题？