SBR10U45SP5
10A SBR®
SUPER BARRIER RECTIFIER
PowerDI®5
Features
Mechanical Data
•
•
Designed as Bypass Diodes for Solar Panels
Selectively Rated for 200ºC Maximum Junction Temperature
for High Thermal Reliability
•
•
Case: PowerDI®5
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
•
•
•
•
•
Patented Super Barrier Rectifier Technology
High Forward Surge Capability
Ultra Low Forward Voltage Drop
Excellent High Temperature Stability
Lead Free Finish, RoHS Compliant (Note 2)
•
•
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
Marking Information: See Page 3
Ordering Information: See Page 3
Weight: 0.093 grams (approximate)
•
•
•
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Top View
Bottom View
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
VRRM
VRWM
VRM
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
45
V
RMS Reverse Voltage
Average Rectified Output Current
32
10
V
A
VR(RMS)
IO
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
275
A
IFSM
Thermal Characteristics
Characteristic
Symbol
Value
Unit
Maximum Thermal Resistance
Rθ
Thermal Resistance Junction to Ambient (Note 3)
Thermal Resistance Junction to Ambient (Note 4)
73
31
ºC/W
JA
Rθ
JA
-65 to +150
≤180
≤200
-65 to +175
VR ≤ 80% VRRM
VR ≤ 50% VRRM
DC Forward Mode
Operating Temperature Range
ºC
ºC
TJ
TSTG
Storage Temperature Range
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Reverse Breakdown Voltage (Note 1)
45
-
-
-
-
V
V(BR)R
IR = 0.5mA
-
0.42
0.47
0.41
IF = 8A, TJ = 25ºC
IF = 10A, TJ = 25ºC
IF = 10A, TJ = 125ºC
Forward Voltage Drop
0.42
0.38
V
VF
-
-
-
-
0.05
-
28.0
0.3
15
75
VR = 45V, TJ = 25ºC
Leakage Current (Note 1)
mA
IR
V
V
R = 45V, TJ = 100ºC
R = 45V, TJ = 150ºC
Notes:
1. Short duration pulse test used to minimize self-heating effect.
2. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm.
SBR and PowerDI are registered trademarks of Diodes Incorporated.
1 of 3
www.diodes.com
March 2008
© Diodes Incorporated
SBR10U45SP5
Document number: DS31371 Rev. 2 - 2