RT9829
Dual Push-Button Reset with Push-Button Controlled
Output Delay
General Description
Features
z Dual Reset Push-Button Inputs
The RT9829 has two combined delayed reset inputs (SR0,
` User Selectable Delay Setup Time : 7.5s and 12.5s
(typ.)
SR1) with a user selectable delayed setup time (tSRC
)
option of either 7.5s or 12.5s (typ.), selectable via the
dual-state DSR input pin. When DSR is connected to
ground, tSRC = 7.5s (typ.); when connected to VCC, tSRC
= 12.5s (typ.). There are two reset outputs which become
active simultaneously after both of the reset inputs are
held active for the selected tSRC delay time. The outputs
remain asserted until either or both inputs go to inactive
logic level (for this device the output reset pulse duration
is fully push-button controlled, meaning neither fixed nor
minimum reset pulse width, nor power on reset pulse is
implemented). The first reset output, RST1, is active low,
open drain; the second reset output, RST2, is active high,
push-pull. The device fully operates over a broad VCC range
from 1.65V to 5.5V. Below 1.575V (typ.), the inputs are
ignored and the outputs are de-asserted. The de-asserted
reset output levels are then valid down to 1V.
z Push-Button Controlled Reset Pulse Duration
` No Fixed nor Minimum Pulse Width Guaranteed
z No Power On Reset
z Dual Reset Outputs
` RST1 : Active Low, Open-Drain
` RST2 : Active High, Push-Pull
z Fixed Reset Input Logic Voltage Levels
z Broad Operating Voltage Range : 1.65V to 5.5V
` Inactive Reset Output Levels Valid Down to 1V
z 2μA Low Supply Current
z Operating Temperature : −40°C to 85°C
z Small Thermally Enhanced 8-Lead WDFN Package
z RoHS Compliant and Halogen Free
Applications
z Mobile phones, Smartphones
The RT9829 is available in a tiny WDFN-8L 2x2 (COL)
package.
z e-Books
z MP3 Players
Ordering Information
RT9829
z Games
z PortableNavigationDevices
Package Type
QW : WDFN-8L 2x2 (COL)
Pin Configurations
Lead Plating System
(TOP VIEW)
G : Green (Halogen Free and Pb Free)
1
2
3
4
8
7
6
5
RST2
VSS
SR1
VCC
SR0
NC
Note :
Richtek products are :
RST1
DSR
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
WDFN-8L 2x2 (COL)
Marking Information
56 : Product Code
W : Date Code
56W
DS9829-00 July 2011
www.richtek.com
1