5秒后页面跳转
RI60 PDF预览

RI60

更新时间: 2024-09-14 21:54:51
品牌 Logo 应用领域
其他 - ETC 开关
页数 文件大小 规格书
2页 59K
描述
Ultra-miniature dry-reed switch germetically sealed in a gas-dilled glass envelope

RI60 数据手册

 浏览型号RI60的Datasheet PDF文件第2页 
RI-60 Series  
RI-60 SERIES  
Ultra-miniature dry-reed switch hermetically sealed in a gas-filled  
glass envelope. Single-pole, single-throw (SPST) type, having  
normally open contacts, and containing two magnetically actuated  
reeds.  
The switch is of the double-ended type and may be actuated by an  
electromagnet, a permanent magnet or a combination of both.  
The device is intended for use in relays, sensors, pulse counters or  
similar devices.  
RI-60 SERIES FEATURES  
u Ideal for ATE switching  
u Contact layers: Gold, sputtered ruthenium  
u Superior glass-to-metal seal and blade alignment  
u Excellent life expectancy and reliability  
Dimensions in inches (mm)  
GENERAL DATA FOR ALL MODELS RI-60  
AT-Customization / Preformed Leads  
Besides the standard models, customized products can  
also be supplied offering the following options:  
! Operate and release ranges to customer specification  
! Cropped and/or preformed leads  
No-load conditions (operating frequency: 100 Hz)  
Life expectancy: min.109 operations with a failure rate of  
less than 2 x10-10 with a confidence level of 90%.  
End of life criteria:  
Contact resistance > 1after 2 ms  
Release time > 2ms (latching or contact sticking).  
COILS  
All characteristics are measured using the Philips stan-  
dard coil. For definitions of the Philips Standard Coil and  
the standard MIL Coil, refer to Application Notes” in  
the Reed Switch Technical & Application Information  
Section of this catalog.  
Loaded conditions (resistive load: 5 V; 100 mA;  
operating frequency: 125 Hz)  
Life expectancy: min. 2 x 107operations with a failure  
rate of less than 10-8 with a confidence level of 90%.  
Relationship between Philips Standard Coil and the  
Standard MIL Coil  
Operate value of standard MIL Coil = 0.83 x operate  
value of Philips Sandard Coil + 0.30 AT.  
Release value of standard MIL Coil = 0.83 x release  
value of Philips Standard Coil + 0.18 AT.  
End of life criteria:  
Contact resistance > 1after 2.5 ms  
Release time > 1 ms (latching or contact sticking).  
Loaded conditions (resistive load: 20 V; 500 mA;  
operating frequency: 125 Hz)  
Life expectancy: min. 2 x 107 operations with a failure  
rate of < 10-8 with a confidence level of 90%.  
LIFE EXPECTANCY AND RELIABILITY  
The life expectancy data given below are valid for a coil  
energized at 1.25 times the published maximum operate  
value for each type in the RI-60 series.  
Catch Us on the Web! www.cotorelay.com E-Mail us: sales@cotorelay.com  
54  

与RI60相关器件

型号 品牌 获取价格 描述 数据表
RI-60 COTO

获取价格

Dry Reed Switch
RI-60 RHOPOINT

获取价格

Superior glass-to-metal seal and blade alignment / Excellent life expectancy and reliabili
RI-70 COTO

获取价格

Dry Reed Switch
RI75N650T7 RECTRON

获取价格

Vdss (V) : 650 V;Id @ 25C (A) : 115 A;Total Gate Charge (nQ) typ : 330 nQ;Maximum Power Di
RI-80 RHOPOINT

获取价格

Dry Reed Switch
RI-80 COTO

获取价格

Dry Reed Switch
RI800WA510MG TOKEN

获取价格

High Voltage Surge Resistor
RI800WA510MJ TOKEN

获取价格

High Voltage Surge Resistor
RI800WA510MK TOKEN

获取价格

High Voltage Surge Resistor
RI800WA51MG TOKEN

获取价格

High Voltage Surge Resistor