5秒后页面跳转
RI-44 PDF预览

RI-44

更新时间: 2024-09-08 04:08:23
品牌 Logo 应用领域
COTO 开关
页数 文件大小 规格书
2页 196K
描述
Dry Reed Switch

RI-44 数据手册

 浏览型号RI-44的Datasheet PDF文件第2页 
RI-44 Series Dry Reed Switch  
RI-44 Series  
Micro dry-reed switch hermetically sealed in a gas-filled glass enve-  
lope. Single-pole, single-throw (SPST) type, having normally open  
contacts, and containing two magnetically actuated reeds. The switch  
is of the double-ended type and may be actuated by an electromag-  
net, a permanent magnet or a combination of both.  
The device is intended for use in sensors, relays, pulse counters or  
similar devices where high voltages need to be switched.  
RI-44 Series Features  
High voltage breakdown voltage  
Can handle up to 40W load  
Contact layers: gold, rhodium  
Superior glass-to-metal seal and blade alignment  
Excellent life expectancy and reliability  
Dimensions in inches (mm)  
General data for all models RI-44  
AT-Customization / Preformed Leads  
Besides the standard models, customized products can  
also be supplied offering the following options:  
! Operate and release ranges to customer specification  
! Cropped and/or preformed leads  
End of life criteria:  
Contact resistance > 2after 2.5 ms  
Release time > 2.5 ms (latching or contact sticking).  
Switching different loads involves different life expect-  
ancy and reliability data. Further information is  
available on request.  
Coils  
All characteristics are measured using the Philips  
Standard Coil. For definitions of the Philips Standard  
Coil, refer to “Application Notes” in the Reed Switch  
Technical & Application Information Section of this  
catalog.  
Other loads, contact Coto for more detail.  
Mechanical Data  
Contact arrangement is normally open; lead finish is  
tinned; net mass is approximately 280 mg; and can be  
mounted in any position.  
Life expectancy and reliability  
The life expectancy data given below are valid for a coil  
energized at 1.5 times the published maximum operate  
value for each type in the RI-44 series.  
Shock  
The switches are tested in accordance with “IEC 68-2-  
27”, test Ea (peak acceleration 500 G, half sinewave;  
duration 11 ms). Such a shock will not cause an open  
switch (no magnetic field present) to close, nor a switch  
kept closed by an 80 AT coil to open.  
Loaded conditions (resistive load: 20 V; 500 mA;  
operating frequency: 125 Hz)  
Operate Sensitivity > 25AT  
MCBF 250M operations  
COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920  
6
(Europe) Tel: +31-45-5439343 / Fax +31-45-5427216  
116  

与RI-44相关器件

型号 品牌 获取价格 描述 数据表
RI-46 RHOPOINT

获取价格

Can handle up to 40 W load / Excellent life expectancy and reliability
RI-46 COTO

获取价格

Dry Reed Switch
RI-46A RHOPOINT

获取价格

Can handle up to 40 W load / Excellent life expectancy and reliability
RI-46A COTO

获取价格

Dry Reed Switch
RI-46AA RHOPOINT

获取价格

Can handle up to 40 W load / Excellent life expectancy and reliability
RI-46AA COTO

获取价格

Dry Reed Switch
RI-46B RHOPOINT

获取价格

Can handle up to 40 W load / Excellent life expectancy and reliability
RI-46B COTO

获取价格

Dry Reed Switch
RI-46C RHOPOINT

获取价格

Can handle up to 40 W load / Excellent life expectancy and reliability
RI-46C COTO

获取价格

Dry Reed Switch