Datasheet
RAA211250
4.5V to 30V, 5A, DC/DC Synchronous Step-Down Regulator w/ Internal Compensation and Adjustable Frequency
The RAA211250 is a DC/DC synchronous step-down
(Buck) regulator that supports a 4.5V to 30V input
voltage range and adjustable output voltage. It can
deliver up to continuous 5A of continuous output
Features
▪ Wide input voltage range: 4.5V to 30V
▪ Adjustable output voltage: 0.8V to 90% of VIN
(limited by minimum off time)
current with premium load and line regulation
▪ Up to 5A of continuous output current
performance.
▪ Default 400kHz switching frequency and
programmable switching frequency range from
200kHz to 800kHz
The RAA211250 uses peak-current mode control
architecture. Its PWM switching frequency is
programmable to provide the best trade-off between
transient response and efficiency. It also supports
PFM operation and DEM to maximize light load
efficiency, in addition to an external bias LDO input to
further reduce power dissipation across the load
range. The regulator also has an internal loop
compensation circuit to reduce the external
component count and BOM cost.
▪ ±1% Load regulation accuracy from -40°C to
125°C, ±0.5% Load regulation accuracy at 25°C
▪ 95µA typical quiescent current
▪ Internal compensation
▪ Internal 0.5ms soft-start in QFN
▪ External programmable soft-start (HTSSOP)
▪ PFM operation and DEM at light load
▪ Integrated external bias LDO
▪ Power-good indicator
The RAA211250 provides useful functions such as
internal or programmable soft-start and power good
indicator. For safe operation, the RAA211250 also
offers protection features such as cycle-by-cycle peak
and valley current limit, input voltage UVLO, output
voltage undervoltage (short-circuit) protection, and
thermal shutdown.
▪ Integrated MOSFET r
(typical): 70mΩ/25mΩ
DS(ON)
(QFN); 115mΩ/40mΩ (TSSOP)
▪ Cycle-by-cycle peak and valley current limit
▪ Input voltage UVLO and output voltage
undervoltage (short-circuit) protection
Applications
▪ Industrial power systems
▪ Thermal Shutdown
▪ Available in 20 Ld QFN 4mm × 3.5mm and 16 Ld
▪ Distributed power supplies and general-purpose
HTSSOP packages
point-of-load
▪ Telecommunication base station power supplies
▪ High-voltage single-board systems
VIN
Up to 30V
VIN
BST
SW
CBOOT
CIN1
CIN2
RIN1
VOUT
3.3V
EN
RIN2
L
COUT
3×47µF
RAA211250
RFB1
PGND
FB
VCC
VCC
FS
SS
PG
RFB2
EBIAS
AGND
VCC
CVCC
Figure 1. Typical Application Circuit
R16DS0184EU0102 Rev.1.02
Oct 12, 2022
Page 1
© 2022 Renesas Electronics