Document 1072-1
For Applications
up to 160 Watts
SMT Planar Transformers
• Rated for 160 Watts
• Designed to operate between 200 kHz and 700 kHz with a
nominal 48 V input.
• High efficiency; excellent DCR; very low leakage inductance;
1500 Vrms, one minute primary to secondary isolation.
• Provides 0.009″ (0.229 mm) clearance above the seating plane
• May be special ordered with an auxiliary winding
Core material Ferrite
Terminations Matte tin over nickel over brass.
Weight 12.0 – 12.8 g
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 36 per tray
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Primary
turns
Primary
Leakage
Volt-time
product typ4
(Vµsec)
Height
max
(in/mm)
DCR max (mOhms)
Primary (N1) Primary (N2) Secondary
Part
inductance2 inductance3
number1
N1
N2
min (µH)
max (µH)
PL160-100L
PL160-101L
PL160-102L
PL160-103L
PL160-104L
4
4
5
5
6
4
5
5
6
6
153
194
240
290
345
0.35
0.40
0.45
0.55
0.55
14.7
14.7
18.5
18.5
21.5
14.7
18.5
18.5
21.5
21.5
6.8
6.8
6.8
6.8
6.8
150
168
187
206
224
0.352 / 8.94
0.352 / 8.94
0.360 / 9.14
0.375 / 9.53
0.375 / 9.53
2
1. To order a transformer with an optional auxiliary winding, add an “X” and the turn count after the PL160, e.g. PL160X3-100LB.
11
1T
Turn counts of 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding. Transformers with auxiliary windings are not stocked.
Pri N1
2. Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected.
3. Leakage inductance measured at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all
secondary pins shorted.
4. Volt-time product is based on primary windings connected in series.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
10
4
3
1T
9
Pri N2
1T
8
5
1
1T
7
Aux (Opt)
6
Specifications subject to change without notice.
Document 1072-1 Revised 03/0514
US +1-847-639-6400 sales@coilcraft.com
Please check our website for latest information.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg