PIC24HJ32GP202/204 and
PIC24HJ16GP304
16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)
with Advanced Analog
Operating Conditions
Timers/Output Compare/Input Capture
• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
• Three 16-bit timers/counters. Can pair up two to
make one 32-bit.
• Two Output Capture modules configurable as
timers/counters
Core: 16-bit PIC24H CPU
• Four Input Capture modules
• Code-efficient (C and Assembly) architecture
• Peripheral Pin Select (PPS) to allow function
remap
• Single-cycle mixed-sign MUL plus hardware divide
Clock Management
Communication Interfaces
• 2% internal oscillator
• One UART module (10 Mbps)
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast wake-up and start-up
- With support for LIN 2.0 protocols and IrDA®
• One 4-wire SPI module (15 Mbps)
• One I2C™ module (up to 1 Mbaud) with SMBus
support
• PPS to allow function remap
Power Management
Input/Output
• Low-power management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.35 mA/MHz dynamic current (typical)
• 55 μA IPD current (typical)
• Sink/Source up to 10 mA (pin specific) for stan-
dard VOH/VOL, up to 16 mA (pin specific) for
non-standard VOH1
• 5V-tolerant pins
• Selectable open drain, pull-ups, and pull-downs
• Up to 5 mA overvoltage clamp current
• External interrupts on all I/O pins
Advanced Analog Features
• ADC module:
- Configurable as 10-bit, 1.1 Msps with four
S&H or 12-bit, 500 ksps with one S&H
Qualification and Class B Support
- Ten analog inputs on 28-pin devices and up
to 13 analog inputs on 44-pin devices
• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
• Class B Safety Library, IEC 60730
• Flexible and independent ADC trigger sources
Debugger Development Support
• In-circuit and in-application programming
• Two program and two complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Trace and run-time watch
Packages
Type
SPDIP
SOIC
SSOP
QFN-S
QFN
TQFP
Pin Count
Contact Lead/Pitch
I/O Pins
28
.100''
28
28
0.65
28
0.65
44
0.65
44
0.80
1.27
21
21
21
21
35
35
Dimensions
1.365x.285x.135''
17.9xx7.50x2.05
10.2x5.3x1.75
6x6x0.9
8x8x0.9
10x10x1
Note: All dimensions are in millimeters (mm) unless specified.
© 2007-2011 Microchip Technology Inc.
DS70289J-page 1