PI5USB30216D
Plug-in Detector for Type-C Connector
Features
Description
Compatible to USB Type-C® Specification 1.1
The DIODES™ PI5USB30216D provides
a cost-effective
solution for USB 3.0 Type-C connector applications.
PI5USB30216D detects the plug-in orientation of the cable at a
Type-C connector. It supports host mode, device mode and
dual role mode ports with automatic configuration based on
the voltage levels detected on CC pins. It is a fully-integrated
solution with ultra-low power dissipation. PI5USB30216D
enters power-saving mode when EN pin is pulled down to
GND through an internal resistor.
Backward Compatible to USB Type-C Specification 1.0
Supports Host mode/Device mode/Dual-role mode
Supports Dual-role modes with/without Try.SNK/Try.SRC
supported
Auto-configure Ports Orientation through CC Detection
Supports both pin control and I2C interface for control
and communication
Integrated high-precision resistors and current sources for
CC pins
Provides support for Default current, 1.5A and 3A modes
with I2C control
PI5USB30216D supports both pin and I2C control base on
ADDR pin setting. It allows the system choose between pin
control and I2C control mode. In pin control mode, the PORT
input pin determines the port setting in which host, device or
dual-role port can be selected. In host mode, the system can
monitor ID pin to know the connector status while default
current mode is set. Systems running in device mode can
monitor system VBUS for connector status as well as OUT1
and OUT2 pins for host’s charging profile capability. Enabling
I2C control mode allows higher flexibility for port control and
Power Saving Mode
Output indicator for plug-in detection
Wide Power Supply Range : 2.7V to 5.5V
Industrial Temperature Range: -40oC to 85oC
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/104/200,
PPAP capable, and manufactured in IATF 16949 certified
facilities), please contact us or your local Diodes
representative.
communications
through
registers
read/write
in
PI5USB30216D. There is also flexibility to support Default,
1.5A and 3A current modes. An interrupt signal for indicating
changes with the I2C registers is sent to the master to notify
the system any change in the Type-C connector while in
parallel the system can still monitor ID pin.
https://www.diodes.com/quality/product-definitions/
Packaging (Pb-free & Green):
12- contact, STQFN(1.6mm x1.6mm)
Applications
Notebooks
Mobile Phones
Tablets
Docking Station
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm
antimony compounds.
DIODES is a trademark of Diodes Incorporated in the United States and other countries.
The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
PI5USB30216D
www.diodes.com
August 2022
Document Number DS44977 Rev 1-2
1
© 2022 Copyright Diodes Incorporated. All Rights Reserved.