5秒后页面跳转
PEVA16V101M0606 PDF预览

PEVA16V101M0606

更新时间: 2024-09-19 00:55:55
品牌 Logo 应用领域
MERITEK /
页数 文件大小 规格书
2页 805K
描述
Conductive Polymer Aluminum Solid Capacitors (V Chip)

PEVA16V101M0606 数据手册

 浏览型号PEVA16V101M0606的Datasheet PDF文件第2页 
PEVASeries  
Conductive Polymer Aluminum  
Solid Capacitors (V Chip)  
MERITEK  
RoHS  
FEATURES  
Standard SMD type  
Rated voltage: 2.5VDC ~25VDC  
Endurance: 2000hours at 105ºC  
Suitable for DC-DC converters, Voltage regulators and decoupling applications.  
SPECIFICATIONS  
Item  
Characteristic  
Category Temperature Range  
Rated Voltage Range  
Surge Voltage  
-55ºC ~ +105C  
2.5VDC ~ 25VDC  
Rated voltage x 1.15V  
M=±20%  
at +105C  
Capacitance Tolerance  
Leakage Current  
at 120Hz, 20ºC  
Shall not exceed values shown in standard ratings  
0.12 (max)  
at 20ºC after 2 minutes  
at 120Hz, 20ºC  
Dissipation Factor ( tan )  
Temperature Stability  
Impedance change  
Z(-55ºC)/Z(+20ºC)≤1.25  
Z(+105ºC)/Z(+20ºC)≤1.25  
at -55C, 100kHz  
at +105C, 100kHz  
Endurance  
Appearance: no significant damage  
The specifications shall be satisfied when  
the capacitors are restored to 20ºC after  
the rated voltage is applied for 2000hours  
at 105ºC  
Capacitance change: ≤ ±20% of the initial value  
DF(tanδ): ≤ 150% of the initial specified value  
ESR: ≤ 150% of the initial specified value  
Leakage current: ≤ the initial specified value  
Damp Heat, Steady State  
Surge Voltage  
Appearance: no significant damage  
The specifications shall be satisfied when  
the capacitors are restored to 20ºC after  
subjecting them to store at 60ºC, 90%~  
95% R.H. for 1000hours, without DC  
applied.  
Capacitance change: ≤ ±20% of the initial value  
DF(tanδ): ≤ 150% of the initial specified value  
ESR: ≤ 150% of the initial specified value  
Leakage current: ≤ the initial specified value  
Appearance: no significant damage  
The capacitors shall be subjected to  
1,000 cycles each consisting of charge  
with the surge voltages specified at  
105ºC for 30 seconds through a  
protective resistor (R=1kΩ) and  
Capacitance change: ≤ ±20% of the initial value  
DF(tanδ): ≤ 150% of the initial specified value  
ESR: ≤ 150% of the initial specified value  
Leakage current: ≤ the initial specified value  
discharge for 5 minutes 30 seconds  
NOTE:  
If any doubt arises, measure the leakage current after following voltage treatment -  
Voltage treatment: DC rated voltage is applied to the capacitors for 60 minutes at 105ºC  
DIMENSIONS (mm)  
Size code  
BD+0.5 (max)  
TH±0.2  
0506  
0604  
6.3  
0606  
6.3  
0807  
8.0  
0810  
8.0  
5.0  
5.8  
4.3  
5.8  
6.8  
9.7  
BW±0.2  
BL±0.2  
5.3  
6.6  
6.6  
8.3  
8.3  
5.3  
6.6  
6.6  
8.3  
8.3  
TL±0.2  
6.0  
7.3  
7.3  
9.0  
9.0  
EW  
0.5~0.8  
1.4  
0.5~0.8  
2.1  
0.5~0.8  
2.1  
0.5~0.8  
2.9  
0.8~1.1  
2.9  
EG±0.2  
Rev. 7  

与PEVA16V101M0606相关器件

型号 品牌 获取价格 描述 数据表
PEVA16V271M0807 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA16V271M0810 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA16V470M0506 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA16V470M0606 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA16V680M0604 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA25V150M0604 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA25V220M0604 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA25V270M0606 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA25V470M0606 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)
PEVA2R5331M0506 MERITEK

获取价格

Conductive Polymer Aluminum Solid Capacitors (V Chip)