Datasheet > PASCSCAS5S

PASCSCAS5S

更新时间： 2024-10-29 01:11:07

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

PASCSCAS5S 数据手册

Optical Communications Systems™

Datasheet

Passive Splitter/Combiners

(Dual-Fiber to Bi-directional Single-Fiber)

HIghlights

Double ﬁber capacity between single-ﬁber sources

Transition between dual-ﬁber and single-ﬁber

Protocol and network operation transparency

Fully passive (no power needed)

Low insertion loss (3.5 dB maximum per cable)

APC connectors for low 3.5 dB insertion loss

Overview

A Splitter/Combiner cable of module connect between dual-ﬁber and single-ﬁber optical signals, potentially doubling

the data capacity of the installed ﬁber plant. Separate Tx and Rx signals from a dual-ﬁber optical device using the same

wavelength over two ﬁbers can be combined through the Splitter/Combiner onto a single bi-directional strand of ﬁber

for the long and expensive run to the remote site.

Another Splitter/Combiner at the remote site splits and combines the signals for the dual-ﬁber device at that location.

Splitter/Combiners are fully passive, and they operate at a speciﬁc wavelength. They are transparent to networks and

protocols. A pair of cables, as in the example above, attenuates an optical signal by no more than 7 dB on either single-

mode or multi-mode ﬁber. Signal reﬂections are eﬀectively eliminated with angled polished connector (APC) at the

single-ﬁber “common” interface.

Central Office

Dual-Fiber

40 km

Single-Fiber

中文翻译

下载PDF