Datasheet > PASM3P2821B-08TT

PASM3P2821B-08TT

更新时间： 2024-10-29 03:15:55

品牌	Logo	应用领域
ALSC		/
页数	文件大小	规格书
7页	174K
描述
Clock Generator

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PASM3P2821B-08TT 数据手册

October 2003

rev 1.0

ASM3P2821B

The ASM3P2821B reduces electromagnetic interference

(EMI) at the clock source, allowing system wide reduction

of EMI of down stream clock and data dependent

signals. The ASM3P2821B allows significant system cost

savings by reducing the number of circuit board layers

ferrite beads, shielding and other passive components

that are traditionally required to pass EMI regulations.

Features

ꢀ

FCC approved method of EMI attenuation.

Generates a 1X low EMI spread spectrum clock of

the input frequency.

ꢀ

Input frequency range: 15MHz – 27MHz.

Internal loop filter minimizes external components

and board space.

ꢀ

Frequency deviation: -2.5%

The ASM3P2821B uses the most efficient and optimized

modulation profile approved by the FCC and is

implemented in a proprietary all digital method.

Low inherent cycle-to-cycle jitter.

3.3V operating voltage.

TTL or CMOS compatible inputs and outputs.

Ultra-low power CMOS design.

The ASM3P2821B modulates the output of a single PLL

in order to “spread” the bandwidth of a synthesized clock,

and more importantly, decreases the peak amplitudes of

its harmonics. This results in significantly lower system

EMI compared to the typical narrow band signal produced

by oscillators and most frequency generators. Lowering

EMI by increasing a signal’s bandwidth is called ‘spread

spectrum clock generation’.

TBD mA @ 3.3V, 24MHz

ꢀ

Pinout compatible with Cypress CY25811.

Products are available for industrial temperature

range.

ꢀ

Available in 8-pin SOIC and TSSOP.

Product Description

The ASM3P2821B is

a versatile spread spectrum

frequency modulator designed specifically for input clock

frequencies in the range of 15MHz - 27MHz. The

ASM3P2821B can generate an EMI reduced clock from a

ceramic resonator or system clock. The ASM3P2821B

offers a percentage deviation of –2.5%.

Applications

The ASM3P2821B is targeted towards EMI management

for high speed digital applications such as PC peripheral

devices, consumer electronics and embedded controller

systems.

VDD

Block Diagram

PLL

Modulation

XIN

Crystal

Oscillator

Frequency

Divider

Output

Divider

Phase

Detector

Loop

Filter

VCO

Feedback

Divider

MODOUT

VSS

Alliance Semiconductor

2575, Augustine Drive • Santa Clara, CA • Tel: 408.855.4900 • Fax: 408.855.4999 • www.alsc.com

Notice: The information in this document is subject to change without notice.

12 3 4 5 6 7

中文翻译

下载PDF

与PASM3P2821B-08TT相关器件

型号	品牌	获取价格	描述	数据表
PASMA100C	BWTECH	获取价格	400W surge capability at 1ms
PASMA100CA	BWTECH	获取价格	400W surge capability at 1ms
PASMA10C	BWTECH	获取价格	400W surge capability at 1ms
PASMA10CA	BWTECH	获取价格	400W surge capability at 1ms
PASMA110C	BWTECH	获取价格	400W surge capability at 1ms
PASMA110CA	BWTECH	获取价格	400W surge capability at 1ms
PASMA11C	BWTECH	获取价格	400W surge capability at 1ms
PASMA11CA	BWTECH	获取价格	400W surge capability at 1ms
PASMA120C	BWTECH	获取价格	400W surge capability at 1ms
PASMA120CA	BWTECH	获取价格	400W surge capability at 1ms