PRODUCT DATASHEET
LED Heat Sink R87-60
This LED Heatsink is part of the Aavid scalable LED portfolio.
Future proof – Designed with the rapidly evolving light engine industry in mind, thermal
performance can be easily increased or decreased without a luminaire redesign by adding
or removing a SynJet Cooler
Flexibility – Configure to order luminaire production process, use heat sinks for low lumen
applications and the SynJet Cooler with heat sink for higher lumen versions
Freedom – Compatible with most major light engines so thermal solutions and mechanical
interfaces do not have to be redesigned when changing light engines
Fast – In stock and ready for overnight delivery, worldwide
Specifications
1
Thermal
Mechanical
2
Thermal Wattage
Heatsink Θs-a
2.3 (°C/W)
2.0 (°C/W)
1.9 (°C/W)
Heat Sink TRise Above Ambient
Material
Finish
6063-T5 Al Extrusion
Black Anodized
235g
Size
10 W
18 W
26 W
23 (°C)
36 (°C)
49 (°C)
Diameter: 87 mm
Height: 60 mm
Weight
Regulatory
RoHS
The chart below summarizes the thermal performance of all round LED heatsink
solutions with diameters from 75 to 100 mm.
1 All values are typical at 25ºC unless otherwise stated.
2 Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
middle of the heat sink to ambient air, with a heat source at least 4.1cm2. Actual thermal performance may vary by application and final product design should be
tested to assure proper thermal performance.
1 Aavid Circle
Phone: 1.855.322.2843
www.aavid.com
MKTG-DOC-000156
Revision
A02
March 2018
Laconia, NH 03246