PRODUCT DATASHEET
SynJet® LED Cooler L100-180
SynJet cooling provides the most reliable thermal management
solution available. This LED cooler has been developed by Aavid
for cooling high power LED Luminaires.
Cools up to 110 W4
L10 of 100K Hours at 60°C
Energy Efficient
5 Yr Warranty
Small Form Factor
Light Weight
Specifications1
Thermal & Acoustic (Single LED Heat Source 25cm2)
TDP4 (W)
ΔT = 30°
2 SJ
Θs-a3
2 SJ
SPL (dBA)5
1 SJ / 2 SJ
SynJet Setting2
Wire Connections
Red to +VDC
PWM at 100% duty cycle
High Performance
0.29
0.29
0.36
0.43
103
103
84
28 / 29
Black only to Ground
Blue to PWM Signal
Red to +VDC
Black & Blue to
Ground
28 / 29
21 / 23
17 / 19
Red to +VDC
Black only to Ground
Standard Performance
Silent Performance
Red to +VDC
Black & Purple to
Ground
69
Thermal & Acoustic (2 LED Heat Sources 25cm2 or One LED Heat Source 75cm2)
TDP4 (W)
ΔT = 30°
2 SJ
Θs-a3
2 SJ
SPL (dBA)5
1 SJ / 2 SJ
SynJet Setting6
Wire Connections
Red to +VDC
PWM at 100% duty cycle
High Performance
0.27
0.27
0.34
0.41
110
110
89
28 / 29
28 / 29
21 / 23
17 / 19
Black only to Ground
Blue to PWM Signal
Red to +VDC
Black & Blue to
Ground
Red to +VDC
Black only to Ground
Standard Performance
Silent Performance
Red to +VDC
Black & Purple to
Ground
73
1 All values are typical at 25ºC unless otherwise stated.
2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings.
3 Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 15cm2 using a reference heat sink. Actual thermal
performance may vary by application and final product design should be tested to assure proper thermal performance.
4 Thermal Design Power is based on a 30ºC temperature rise of heat sink mounting surface above ambient temperature around cooler.
5 Sound Pressure Level is measured at 1 meter distance per ISO 7779.
6 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings.
1 Aavid Circle
Laconia, NH 03246
Phone: 1.855.322.2843
www.aavid.com
MKTG-DOC-00175
Revision
A05
March 2018