NCP5214A
2−in−1 Notebook DDR
Power Controller
The NCP5214A 2−in−1 Notebook DDR Power Controller is
specifically designed as a total power solution for notebook DDR
memory system. This IC combines the efficiency of a PWM
controller for the VDDQ supply with the simplicity of linear
regulators for the VTT termination voltage and the buffered low
noise reference. This IC contains a synchronous PWM buck
controller for driving two external NFETs to form the DDR memory
supply voltage (VDDQ). The DDR memory termination regulator
output voltage (VTT) and the buffered VREF are internally set to
track at the half of VDDQ. An internal power good voltage monitor
tracks VDDQ output and notifies the user whether the VDDQ output
is within target range. Protective features include soft−start
circuitries, undervoltage monitoring of supply voltage, VDDQ
overcurrent protection, VDDQ overvoltage and undervoltage
protections, and thermal shutdown. The IC is packaged in DFN22.
http://onsemi.com
MARKING
DIAGRAM
1
DFN22
22
MN SUFFIX
NCP5214A
AWLYYWW
G
CASE 506AF
1
NCP5214A= Specific Device Code
A
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
WL
YY
WW
G
Features
• Incorporates VDDQ, VTT Regulator, Buffered VREF
• Adjustable VDDQ Output
• VTT and VREF Track VDDQ/2
• Operates from Single 5.0 V Supply
• Supports VDDQ Conversion Rails from 4.5 V to 24 V
• Power−saving Mode for High Efficiency at Light Load
• Integrated Power FETs with VTT Regulator Sourcing/Sinking
1.5 A DC and 2.4 A Peak Current
PIN CONNECTIONS
VDDQEN
VTTEN
FPWM
SS
VTTGND
VTT
PGND
BGDDQ
VCCP
SWDDQ
TGDDQ
BOOST
OCDDQ
PGOOD
VTTREF
FBDDQ
COMP
• Requires Only 20 mF Ceramic Output Capacitor for VTT
• Buffered Low Noise 15 mA VREF Output
• All External Power MOSFETs are N−channel
• <5.0 mA Current Consumption During Shutdown
• Fixed Switching Frequency of 400 kHz
• Soft−start Protection for VDDQ and VTT
• Undervoltage Monitor of Supply Voltage
• Overvoltage Protection and Undervoltage Protection for VDDQ
• Short−circuit Protection for VDDQ and VTT
• Thermal Shutdown
VTTI
FBVTT
AGND
DDQREF
VCCA
(Top View)
NOTE: Pin 23 is the thermal pad on
the bottom of the device.
• Housed in DFN22
• This is a Pb−Free Device
ORDERING INFORMATION
Device
Package
Shipping†
2500 Tape & Reel
Typical Applications
NCP5214AMNR2G DFN22
(Pb−Free)
• Notebook DDR/DDR2 Memory Supply and Termination Voltage
• Active Termination Busses (SSTL−18, SSTL−2, SSTL−3)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
May, 2006 − Rev. 0
NCP5214A/D