NCP367
Battery Charge Front-End
Protection, USB and AC/DC
Supply Compliant
NCP367 is a charge path protection device which allows
disconnecting the systems from its output pin in case wrong charging
conditions are detected. The system is positive overvoltage protected
up to +30 V. Thanks to a very low current consumption, the USB
charge is compatible with this integrated component.
http://onsemi.com
8
This device uses internal PMOS FET, making external devices
unnecessary, which reduces the system cost and PCB area of the
application board. First, NCP367 is able to instantaneously
disconnect the output from the input if the input voltage exceeds the
overvoltage threshold. Additional overcurrent protection function
allows turning off internal PMOS FET when the charge current
exceeds current limit, which is externally selectable.
1
DFN8
MU SUFFIX
CASE 506BP
MARKING DIAGRAM
The current limit value can be modified with control logic pin to
divide it by internal gain, allowing USB 100 mA/500 mA charging or
USB/Wall adapter charging up to overcurrent threshold. At the same
time, Li ion Battery voltage is continuously monitored, providing
more safety during the charge. Thermal shutdown protection is also
available.
1
XX MG
G
XX = Specific Device Code
M
= Date Code
NCP367 provides a negative going flag (FLAG) output, which
alerts the system that a fault has occurred as overvoltage (power
supply or battery voltage), overcurrent or thermal event.
G
= Pb−Free Device
(*Note: Microdot may be in either location)
In addition, the device has ESD−protected input (15 kV Air) when
bypassed with a 1 mF or larger capacitor.
PIN ASSIGNMENT
GND
FLAG
GS
IN
VBAT
NC
1
2
3
4
8
7
6
5
Features
• Overvoltage Protection Up to + 30 V
• Fast Turn Off Time
OUT
• Very Low Current Consumption/USB Compliant
• Li ion Battery Voltage Monitoring
• Overvoltage Lockout (OVLO)
• Undervoltage Lockout (UVLO)
• Overcurrent Protection Externally Adjustable (OCP) up to 2.8 A
• Thermal Shutdown
EN
ILIM
(Top View)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 12 of this data sheet.
• Shutdown EN and Gain Input Pins
• Soft−Start to Eliminate Inrush Current
Typical Application
• Alert FLAG Output
• USB Devices
• Compliance to IEC61000−4−2 (Level 4)
• Mobile Phones
8 kV (Contact), 15 kV (Air)
• Peripheral
• ESD Ratings: Machine Model = B
ESD Ratings: Human Body Model = 2
• 8 Lead DFN 2.2x2 mm Package
• These are Pb−Free Devices
• Personal Digital Applications
• MP3 Players
©
Semiconductor Components Industries, LLC, 2013
1
Publication Order Number:
September, 2013 − Rev. 10
NCP367/D