NCP1592
3 V to 6 V Input, 6 A Output
Synchronous Buck PWM
Switcher with Integrated
FETs
NCP1592 is a low input voltage 6 A synchronous buck converter
that integrates both 30 mW high side and low side MOSFETs.
NCP1592 is designed for space sensitive and high efficiency
applications. The main features include: a high performance voltage
error amplifier; an under−voltage−lockout circuit to prevent start−up
until the input voltage reaches 3 V; an internally or externally
programmable soft−start circuit to limit inrush currents; and a power
good output monitor signal. NCP1592 is available in thermally
enhanced 28−pin TSSOP package.
http://onsemi.com
MARKING
DIAGRAM
1592G
ALYW
TSSOP−28 EP
CASE 948BG
Features
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
• 30 mW, 12 A Peak MOSFET Switches for High to Efficiency at 6 A
Continuous Output Source or Sink Current
• Adjustable Output Voltage Down to 0.891 V With 1.0% Accuracy
• Wide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable
280 kHz to 700 kHz
• Synchronizable to 700 kHz
• Load Protected by Peak Current Limit and Thermal Shutdown
• Integrated Solution Reduces Board Area and Component Count
• This is a Pb−Free Device
Application
• Low−Voltage, High−Density Distributed Power Systems
• High Performance Point of Load Regulation for DSPs, FPGAs,
ASICs and Microprocessors
V = 5 V,
I
V
O
= 3.3 V
• Broadband, Networking and Optical Communications Infrastructure
• Portable Computing/Notebook PCs
LOAD CURRENT (A)
Figure 1. Efficiency at 350 kHz
Input
VIN
Output
PH
NCP1592
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 18 of this data sheet.
BOOT
PGND
VBIAS
AGND
VSENSE
COMP
Figure 2. Typical Application Circuit
© Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
July, 2012 − Rev. 1
NCP1592/D