NCP1597A
1 MHz, 2.0 A Synchronous
Buck Regulator
The NCP1597A family are fixed 1 MHz, high−output−current,
synchronous PWM converters that integrate a low−resistance,
high−side P−channel MOSFET and a low−side N−channel MOSFET.
The NCP1597A utilizes current mode control to provide fast transient
response and excellent loop stability. It regulates input voltages from
4.0 V to 5.5 V down to an output voltage as low as 0.8 V and is able to
supply up to 2.0 A.
http://onsemi.com
MARKING
DIAGRAM
The NCP1597A includes an internally fixed switching frequency
(FSW), and an internal soft−start to limit inrush currents. Using the EN
pin, shutdown supply current is reduced to 3 mA maximum.
Other features include cycle−by−cycle current limiting,
short−circuit protection, power saving mode and thermal shutdown.
1
1
1597A
AYWWG
G
DFN6
CASE 506AH
A
Y
= Assembly Location
= Year
= Work Week
Features
WW
G
= Pb−Free Package
• Input Voltage Range: from 4.0 V to 5.5 V
• Internal 140 mW High−Side Switching P−Channel MOSFET and
90 mW Low−Side N−Channel MOSFET
• Fixed 1 MHz Switching Frequency
• Cycle−by−Cycle Current Limiting
• Overtemperature Protection
(Note: Microdot may be in either location)
PIN CONNECTIONS
FB
GND
LX
1
2
3
6 EN
• Internal Soft−Start
5
4
VCC
• Start−up with Pre−Biased Output Load
• Adjustable Output Voltage Down to 0.8 V
• Power Saving Mode During Light Load
• These are Pb−Free Devices
VCCP
ORDERING INFORMATION
Applications
• DSP Power
• Hard Disk Drivers
• Computer Peripherals
• Home Audio
• Set−Top Boxes
• Networking Equipment
• LCD TV
• Wireless and DSL/Cable Modem
• USB Power Devices
†
Device
NCP1597AMNTWG
Package
Shipping
DFN6
(Pb−Free)
3000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2010
1
Publication Order Number:
June, 2010 − Rev. 0
NCP1597/D