NCP1595, NCP1595A
Current Mode PWM
Converter for Low Voltage
Outputs
The NCP1595/NCP1595A is a current mode PWM buck converter
with integrated power switch and synchronous rectifier. It can provide
up to 1.5 A output current with high conversion efficiency. High
frequency PWM control scheme can provide a low output ripple noise.
Thus, it allows the usage of small size passive components to reduce
the board space. In a low load condition, the controller will
automatically change to PFM mode for provides a higher efficiency at
low load. Additionally, the device includes soft−start, thermal
shutdown with hysteresis, cycle−by−cycle current limit, and short
circuit protection. This device is available in compact 3x3 DFN
package.
http://onsemi.com
1
DFN6 3*3 MM, 0.95 PITCH
CASE 506AH
Features
MARKING DIAGRAMS
• High Efficiency 95% @ 3.375 V
• Synchronous Rectification for Higher Efficiency in PWM Mode
• Integrated MOSFET
1
1
N1595
ALYW
G
1595A
ALYW
G
• Fully Internal Compensation
• High Switching Frequency, 1.0 MHz
• Low Output Ripple
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
• Cycle−by−cycle Current Limit
• Current Mode Control
• Short Circuit Protection
• Built−in Slope Compensation for Current Mode PWM Converter
• $1.5% Reference Voltage
PIN CONNECTIONS
• Thermal Shutdown with Hysteresis
• Ext. Adjustable Output Voltage
• Fast Transient Response
FB
GND
LX
NC
VCC
VCCP
FB
GND
LX
EN
VCC
VCCP
• Low Profile and Minimum External Components
• Designed for Use with Ceramic Capacitor
• Compact 3x3 DFN Package
1595
1595A
• These are Pb−Free Devices
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 11 of this data sheet.
Typical Applications
• Hard Disk Drives
• USB Power Device
• Wireless and DSL Modems
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
October, 2006 − Rev. 2
NCP1595/D