NCP1596, NCP1596A
Product Preview
1.5 A, 1.5 MHz Current
Mode PWM Buck Down
Converter
http://onsemi.com
The NCP1596/NCP1596A is a current mode PWM buck converter
with integrated power switch. It can provide up to 1.5 A output current
with high conversion efficiency. High frequency PWM control
scheme can provide a low output ripple noise. Thus, it allows the
usage of small size passive components to reduce the board space. In a
low load condition, the controller will automatically change to PFM
mode which provides a higher efficiency at low load. Additionally, the
device includes soft−start, thermal shutdown with hysteresis,
cycle−by−cyclecurrent limit, and short circuit protection. This device
is available in a compact 3x3 DFN package.
1
6 PIN DFN 3x3
MN SUFFIX
CASE 506AH
MARKING DIAGRAMS
Features
• High Efficiency up to 90%, 1 A @ 3.3 V, 75% @ 1.2 V
• Fully Internal Compensation
1
1
N1596
ALYW
G
1596A
ALYW
G
• Low Output Voltage Ripple, 20 mV Typical
•
1.5% Reference Voltage
N1596/1596A = Specific Device Code
A
L
Y
W
G
= Assembly Location
= Wafer Lot
• High PWM Switching Frequency, 1.5 MHz
• Automatic PWM / PFM Switchover at Light Load
• Built−in 1 ms Digital Soft Start
= Year
= Work Week
= Pb−Free Package
• Cycle−by−cycle Current Limit
• Thermal Shutdown with Hysteresis
• Internal UVLO Protection
PIN CONNECTIONS
• Ext. Adjustable Output Voltage
• Low Profile and Minimum External Components
• Designed for use with Ceramic Capacitor
• Compact 3x3 DFN Package
FB
GND
LX
NC
VCC
VCCP
FB
GND
LX
EN
VCC
VCCP
1596
1596A
• These are Pb−Free Devices
(Top View)
Typical Applications
• Hard Disk Drives
• USB Power Device
• Wireless and DSL Modems
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 11 of this data sheet.
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2009
1
Publication Order Number:
March, 2009 − Rev. P3
NCP1596/D