NB3H60113G
3.3 V / 2.5 V Programmable
OmniClock Generator
with Single Ended (LVCMOS/LVTTL) and
Differential (LVPECL/LVDS/ HCSL/CML)
Outputs
www.onsemi.com
The NB3H60113G, which is a member of the OmniClock family, is
a one−time programmable (OTP), low power PLL−based clock
generator that supports any output frequency from 8 kHz to 200 MHz.
The device accepts fundamental mode parallel resonant crystal or a
single ended (LVCMOS/LVTTL) reference clock as input. It
generates either three single ended (LVCMOS/LVTTL) outputs, or
one single ended output and one differential
(LVPECL/LVDS/HCSL/CML) output. The output signals can be
modulated using the spread spectrum feature of the PLL
(programmable spread spectrum type, deviation and rate) for
applications demanding low electromagnetic interference (EMI).
Using the PLL bypass mode, it is possible to get a copy of the input
clock on any or all of the outputs. The device can be powered down
using the Power Down pin (PD#). It is possible to program the internal
input crystal load capacitance and the output drive current provided by
the device. The device also has automatic gain control (crystal power
limiting) circuitry which avoids the device overdriving the external
crystal.
WDFN8
CASE 511AT
MARKING DIAGRAM
1
H0MG
G
H0 = Specific Device Code
M
G
= Date Code
= Pb−Free Device
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information on page 21 of
this data sheet.
Features
• Member of the OmniClock Family of Programmable Clock
Generators
• Operating Power Supply: 3.3 V 10%, 2.5 V 10%
• I/O Standards
♦ Inputs: LVCMOS/LVTTL, Fundamental Mode
• Power Saving mode through Power Down Pin
• Programmable PLL Bypass Mode
• Programmable Output Inversion
Crystal
♦ Outputs: LVCMOS/LVTTL
♦ Outputs: LVPECL, LVDS, CML and HCSL
• Programming and Evaluation Kit for Field
Programming and Quick Evaluation
• Temperature Range −40°C to 85°C
• Packaged in 8−Pin WDFN
• 3 Programmable Single Ended (LVCMOS/LVTTL)
Outputs from 8 kHz to 200 MHz
• 1 Programmable Differential Clock Output up to
200 MHz
• These are Pb−Free Devices
• Input Frequency Range
♦ Crystal: 3 MHz to 50 MHz
Typical Applications
♦ Reference Clock: 3 MHz to 200 MHz
• Configurable Spread Spectrum Frequency Modulation
Parameters (Type, Deviation, Rate)
• Programmable Internal Crystal Load Capacitors
• eBooks and Media Players
• Smart Wearables, Portable Medical and Industrial
Equipment
• Set Top Boxes, Printers, Digital Cameras and
Camcorders
• Programmable Output Drive Current for Single Ended
Outputs
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
January, 2016 − Rev. 2
NB3H60113G/D