MTR
Vishay Electro-Films
www.vishay.com
Wire Bondable Thin Film Multi-Tap Resistor Arrays
FEATURES
• Wire bondable
• Selectable values by wire bonding
• Chip size: 0.030" x 0.030"
• Case: 0303
• Standard resistance range: 100 to 24 k or
800 to 240 k
• Resistor material:
Tantalum nitride, self-passivating
Product may not be to scale
• Oxidized silicon substrate for good power dissipation
• Ideally suited for hybrid prototyping
The MTR multi-tap resistors, available in two formats, offer
eleven taps allowing the user to select specified increments
a wide range of values. The desired resistance value is
obtained by bonding the wires to the appropriate pads.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
These chips are manufactured using Vishay Electro-Films
(EFI) sophisticated Thin Film equipment and manufacturing
technology. The MTRs are 100 % electrically tested and
visually inspected to MIL-STD-883.
The MTR series of multi-tap resistor chips are designed to
satisfy the requirements of prototype development and
circuit trimming in hybrid packages through selective
wire-bonding.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
UNIT
Format A
Format B
100, 200, 400, 800, 2.4K, 8K, 24K
800, 2.4K, 8K, 24K, 80K, 160K, 240K
Total Resistance Range
7 Resistors Between Pads 1 and 8
5 Resistors Between Pads 8 and 13
Each 12.5 % of total resistance
Each 2.5 % of total resistance
Standard Tolerances
TCR
10, 20 of total resistance of all 12 resistors
100
%
ppm/°C
Example:
When the total resistance value is 8 k, the resistors between pads 8 and 13 are 200 each, and the resistors between pads
1 and 8 are 1 k each.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
VALUE
5
UNIT
TCR Tracking Between Elements
ppm/°C
dB
%
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106
Stability, 1000 h, +125 °C, 125 mW
Operating Temperature Range
-30 typ.
0.5 max. R/R
0.5 max. R/R
- 55 to + 125
0.25 max. R/R
0.5 max. R/R
200
%
°C
%
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure +150 °C, 100 h
Dielectric Voltage Breakdown
%
V
Insulation Resistance
1012 min.
Operating Voltage
100 max.
V
DC Power Rating at +70 °C (Derated to Zero at +175 °C)
5 x Rated Power Short-Time Overload, +25 °C, 5 s
0.250, total R
0.25 max. R/R
W
%
Revision: 05-Aug-2019
Document Number: 61045
1
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000