‡
MT9P111: 1/4-inch 5 Mp SOC Digital Image Sensor
Features
1/4-Inch 5 Mp System-On-A-Chip (SOC) CMOS
Digital Image Sensor
MT9P111 Datasheet, Rev. G
For the latest datasheet, please visit www.onsemi.com
Features
Table 1:
Key Performance Parameters
• Superior low-light performance
• Ultra-low-power, low-cost
• Anti-shake support
• One time programmable memory (OTPM) for
automatic positional gain adjustments and other
uses
• Parallel data output and serial mobile industry
processor interface (MIPI) data output
• Integrated real-time JPEG encoder
• Flexible support for external auto focus
• Internal master clock generated by on-chip
phase-locked loop (PLL) oscillator
• Electronic rolling shutter (ERS), progressive scan
• Integrated image flow processor (IFP) for single-die
camera module
• Automatic image correction and enhancement
• Selectable output data format: YCbCr, 565RGB,
555RGB, 444RGB, JPEG 4:2:2, processed Bayer,
RAW8- and RAW10-bit
• Output FIFO for data rate equalization
• Programmable I/O slew rate
• Xenon and LED flash support with fast exposure
adaptation
• Configurable gamma correction based on scene
brightness
• Arbitrary image scaling with anti-aliasing
• Two-wire serial interface providing access to
registers and microcontroller memory, additional
serial interface under user control
• Includes internal VCM driver and access to internal
A/D converter
Parameter
Value
1/4-inch
Optical format
Full resolution
Pixel size
2592 x 1944 pixels
1.4 m x 1.4 m
62 dB
Dynamic range
SNR MAX
35.2 dB
Responsivity
Chief ray angle
0.68 V/lux-sec
25.11° MAX at 80% image height
RGB Bayer pattern
Color filter array
Active pixel array area
3.62 mm x 2.72 mm
Electronic rolling shutter (ERS) and
Global reset release (GRR)
Shutter type
Input clock frequency
1048 MHz
15 fps at full resolution (JPEG),
30 fps in preview mode (VGA bin2
skip2)
Maximum frame rate
Maximum pixel data
output
MIPI: 768 Mb/s MAX
Parallel: 96 Mp/s
Maximum pixel clock
frequency
96 MHz
Analog 2.53.1 V
Digital 1.71.95 V
Supply voltage I/O 1.7-1.9V or 2.5–3.1 V
PLL 2.53.1 V
MIPI
2.5–3.1 V
ADC resolution
12-bit, on-die
550 mW at 30 fps, 1280 x 720 video
mode
Power consumption
401 mW at 30 fps, HP preview
mode
230 mW at 23 fps, preview LP mode
Applications
Current consumption
10 A, shutdown, at +70°C
• Cellular phones
• PC cameras
• PDAs
Operating temperature
(at junction)
–30°C to +70°C
MT9P111_DS Rev. G Pub. 5/15 EN
1
©Semiconductor Components Industries, LLC 2015,