MT9F002: 1/2.3-Inch 14 Mp CMOS Digital Image Sensor
Features
1/2.3-Inch 14 Mp CMOS Digital Image Sensor
MT9F002 Data Sheet, Rev. 9
For the latest data sheet, please visit: www.onsemi.com
Table 1:
Key Performance Parameters
Features
Parameter
Optical format
Value
1/2.3-inch (4:3)
• 1.4 m pixel with ON Semiconductor A-Pix™
technology
• Simple two-wire serial interface
• Auto black level calibration
• Full HD support at 60 fps for maximum video
performance
•
4608H x 3288V: (entire array): 6.451mm (H)
x 4.603mm (V), 7.925mm diagonal
•
4384H x 3288V (4:3, still mode): 6.138mm
(H) x 4.603mm (V), 7.672mm diagonal
4608H x 2592V (16:9, video mode):
Active pixels and imager size
•
6.451mm (H) x 3.629mm (V), 7.402mm diagonal
• 20 percent extra image array area in full HD to
enable electronic image stabilization (EIS).
• Support for external mechanical shutter
• Support for external LED or xenon flash
• High frame rate preview mode with arbitrary down-
size scaling from maximum resolution
• Programmable controls: gain, horizontal and vertical
blanking, frame size/rate, exposure, left–right and
top–bottom image reversal, window size, and
panning
Pixel size
1.4 m x 1.4m
0°, 11.4°, and 25°
Chief ray angle
Color filter array
RGB Bayer pattern
Electronic rolling shutter (ERS) with global reset
release (GRR)
Shutter type
Input clock frequency
2–64 MHz
Maxi-
mum
data
rate
Parallel
96 Mp/s at 96 MHz PIXCLK
HiSPi (4-lane)
700 Mbps/lane
14M resolution
(4384H x 3288V)
Programmable up to 13.7 fps for HiSPi I/F, 6.3 fps
for parallel I/F
• Data interfaces: parallel or four-lane serial high-
speed pixel interface (HiSPi™) differential signaling
(SLVS)
• On-chip phase-locked loop (PLL) oscillator
• Bayer pattern downsize scaler
•
•
•
30 fps with binning
60 fps with skip2bin2
60 fps using HiSPi interface
Preview VGA mode
Frame
rate
2304H x 1296V (1080p +20%EIS)
30 fps using parallel interface
1080p mode:
•
2256H x 1268V (1080p +17%EIS)
12-bit, on-chip
ADC resolution
Responsivity
0.724 V/lux-sec (550nm)
65.3 dB
Dynamic range
Applications
SNR
35.5 dB
MAX
• Digital video cameras
• Digital still cameras
1.7–1.9 V (1.8 V nominal)
or 2.4–3.1 V (2.8 V nominal)
I/O Digital
Digital
Analog
1.7–1.9 V (1.8 V nominal)
2.7–3.1 V (2.8 V nominal)
Supply
voltage
HiSPi PHY
HiSPi I/O (SLVS)
HiSPi I/O (HiVCM)
1.7–1.9 V (1.8 V nominal)
0.3 - 0.9 V (0.4 or 0.8 V nominal)
1.7–1.9 V (1.8 V nominal)
General Description
The ON Semiconductor MT9F002 is a 1/2.3-inch
CMOS active-pixel digital imaging sensor with an
active pixel array of 4608H x 3288V (4640H x 3320V
including border pixels). It can support 14-megapixel
(4384H x 3288V) digital still images and a 1080p plus
additional 20 percent pixels for electronic image stabi-
lization (4608H x 2592V) in digital video mode. The
MT9F002 sensor is programmable through a simple
two-wire serial interface, and has low power consump-
tion.
Full resolution 13.65
fps (HiSPi serial I/F,
12-bit)
724 mW
Power
Con-
sump-
tion
1080p60 (HiSPi serial
I/F, 10-bit)
XYbin2: 596 mW
XYbin2: 443 mW
1080p30 (HiSPi serial
I/F, 10-bit)
Package
48-pin iLCC (10 mm x 10 mm) and bare die
–30°C to +70°C (at junction)
Operating temperature
MT9F002/D Rev. 9, 1/16 EN
1
©Semiconductor Components Industries, LLC 2016,