2Mb: 128K x 18, 64K x 32/36
FLOW-THROUGH SYNCBURST SRAM
MT58L128L18F, MT58L64L32F,
MT58L64L36F; MT58L128V18F,
MT58L64V32F, MT58L64V36F
2Mb SYNCBURST™
SRAM
3.3V VDD, 3.3V or 2.5V I/O, Flow-Through
FEATURES
• Fast clock and OE# access times
100-Pin TQFP*
• Single +3.3V +0.3V/-0.165V power supply (VDD)
• Separate +3.3V or +2.5V isolated output buffer supply
(VDDQ)
• SNOOZE MODE for reduced-power standby
• Common data inputs and data outputs
• Individual BYTE WRITE control and GLOBAL WRITE
• Three chip enables for simple depth expansion and
address pipelining
• Clock-controlled and registered addresses, data I/Os
and control signals
• Internally self-timed WRITE cycle
• Burst control pin (interleaved or linear burst)
• Automatic power-down for portable applications
• 100-lead TQFP package for high density, high speed
• Low capacitive bus loading
• x18, x32 and x36 versions available
*JEDEC-standard MS-026 BHA (LQFP).
OPTIONS
MARKING
• Timing (Access/Cycle/MHz)
6.8ns/8.0ns/125 MHz
7.5ns/8.8ns/113 MHz
8.5ns/10ns/100 MHz
10ns/15ns/66 MHz
-6.8
-7.5
-8.5
-10
GENERAL DESCRIPTION
®
™
The Micron SyncBurst SRAM family employs high-
speed, low-power CMOS designs that are fabricated using
an advanced CMOS process.
Micron’s 2Mb SyncBurst SRAMs integrate a 128K x 18,
64Kx32,or64Kx36SRAMcorewithadvancedsynchronous
peripheral circuitry and a 2-bit burst counter. All
synchronous inputs pass through registers controlled by a
positive-edge-triggered single clock input (CLK). The
synchronous inputs include all addresses, all data inputs,
active LOW chip enable (CE#), two additional chip enables
for easy depth expansion (CE2, CE2#), burst control inputs
(ADSC#, ADSP#, ADV#), byte write enables (BWx#) and
global write (GW#).
• Configurations
3.3V I/O
128K x 18
64K x 32
64K x 36
MT58L128L18F
MT58L64L32F
MT58L64L36F
2.5V I/O
128K x 18
64K x 32
64K x 36
MT58L128V18F
MT58L64V32F
MT58L64V36F
Asynchronous inputs include the output enable (OE#),
snooze enable (ZZ) and clock (CLK). There is also a burst
mode pin (MODE) that selects between interleaved and
linear burst modes. The data-out (Q), enabled by OE#, is
also asynchronous. WRITE cycles can be from one to two
bytes wide (x18) or from one to four bytes wide (x32/x36),
as controlled by the write control inputs.
• Package
100-pin TQFP
T
• Operating Temperature Range
Commercial (0°C to +70°C)
Industrial (-40°C to +85°C)
None
IT
Burstoperationcanbeinitiatedwitheitheraddressstatus
processor (ADSP#) or address status controller (ADSC#)
input pins. Subsequent burst addresses can be internally
generated as controlled by the burst advance pin (ADV#).
• Part Number Example: MT58L64L36FT-8.5 IT
2Mb: 128K x 18, 64K x 32/36 Flow-Through SyncBurst SRAM
MT58L128L18F.p65 – Rev. 9/99
Micron Technology, Inc., reserves the right to change products or specifications without notice.
1999, Micron Technology, Inc.
All registered and unregistered trademarks are the sole property of their respective companies.
1