0805CHIPINDUCTORS
High Reliability Chip Inductors MS336RAD
The MS336RAD inductors provide exceptional Q values,
even at high frequencies.They have a ceramic body and
wire wound construction to provide the highest SRFs,
tight inductance tolerance and batch consistency.
ThisrobustversionofCoilcraft’sstandard0805HQseries
features high temperature materials that allow operation
inambienttemperaturesupto155°C.Theleach-resistant
base metalization with tin-lead (Sn-Pb) terminations
ensures the best possible board adhesion.
Inductance2
(nH)
Percent
tolerance
SRF min4
(GHz)
DCRmax5
(Ohms)
Imax
(A)
Part number1
Q min3
MS336RAD2N5JSZ
MS336RAD5N6JSZ
MS336RAD6N2JSZ
MS336RAD12NJSZ
MS336RAD16N_SZ
2.5 @ 250 MHz
5.6 @ 250 MHz
6.2 @ 250 MHz
12 @ 250 MHz
16 @ 250 MHz
5
5
5
5
56 @ 1000 MHz
83 @ 1000 MHz
80 @ 1000 MHz
52 @ 500 MHz
72 @ 500 MHz
>5.00
4.88
4.55
2.80
2.40
0.020
0.035
0.035
0.045
0.060
2.0
1.9
1.8
1.6
1.4
5,2
MS336RAD18N_SZ
MS336RAD20N_SZ
MS336RAD27N_SZ
MS336RAD30N_SZ
MS336RAD39N_SZ
18 @ 250 MHz
20 @ 250 MHz
27 @ 250 MHz
30 @ 250 MHz
39 @ 250 MHz
5,2
5,2
5,2,1
5,2,1
5,2,1
70 @ 500 MHz
54 @ 250 MHz
58 @ 250 MHz
50 @ 250 MHz
53 @ 250 MHz
2.20
2.05
2.00
1.74
1.60
0.060
0.060
0.070
0.095
0.110
1.4
1.4
1.3
1.1
1.0
MS336RAD48N_SZ
MS336RAD51N_SZ
48 @ 200 MHz
51 @ 200 MHz
5,2,1
5,2,1
44 @ 150 MHz
36 @ 150 MHz
1.40
1.28
0.095
0.120
1.1
0.9
1. When ordering, please specify tolerance and testing codes:
Core material Ceramic
Terminations Tin-lead (63/37) over silver-platinum-glass frit
MS336RAD51NGSZ
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Tolerance: F = 1% G = 2% J = 5%
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
Storage temperature Component: –55°C to +155°C.
Packaging: –55°C to +80°C
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286 impedance analyzer or equivalent with Coilcraft-provided correla-
tion pieces.
3. Q measured at the same frequency as inductance using an Agilent/HP
4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 2000 per 7″ reel
Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.65 mm pocket depth
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document MS197-1 Revised 11/06/12
®
This product may not be used in medical or high
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
risk applications without prior Coilcraft approval.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012