MP5920
Hot-Swap Controller and Energy Monitor
with PMBus Interface
DESCRIPTION
FEATURES
The MP5920 is a hot-swap protection controller
designed to protect circuitry on its output from
transients on its input. The MP5920 allows a
circuit board to be removed from or inserted
into a live backplane and protects its input from
undesired shorts and transients coming from its
output.
Easily Configure to a Single Output with
Intelli-Fuses in Parallel
Controllable Intelli-Fuse On or Off through
ON
Programmable Parameters through PMBus
Programmable Current Limit Reference
Voltage for Intelli-Fuse Current Limit Set
Precision Current Sensing and Temperature
Sensing from Intelli-Fuse
PMBus Fast Mode Compliant
Built-In 12-Bit ADC for Current, VIN, VOUT, or
Temperature Reading
Programmable Average Time
Reports Power and Energy Consumption
The MP5920 works with an Intelli-Fuse, which
can feed back the current, voltage, and
temperature information to the MP5920. The
Intelli-Fuse can be turned on or off through the
ON pin. The MP5920 limits the Intelli-Fuse
maximum load current by controlling the current
limit reference voltage through CLPWM.
Available in
Package
a
TQFN-32 (4mmx4mm)
The MP5920 can be configured to a single
output easily with several fuses in parallel.
APPLICATIONS
The PMBus interface allows the MP5920 to
read current, voltage, or temperature data and
input power from a 12-bit ADC.
Hot Swap
PC Cards
Disk Drives
Servers
Networking
Laptops
The MP5920 is available in a 32-pin TQFN
(4mmx4mm) package.
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS” and “The Future of Analog IC Technology” are
registered trademarks of Monolithic Power Systems, Inc.
MP5920 Rev. 1.1
9/4/2017
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
1