MP5921
16V, 50A, 1mΩ RDS(ON)
,
Hot-Swap Intelli-Fuse Solution
DESCRIPTION
FEATURES
The MP5921 is a monolithic, integrated
controller and switch that contains a high-side
MOSFET and other circuitries that enable it to
work in standalone operation or to be controlled
by a hot-swap controller. The MP5921 drives up
to 50A of continuous current per device at room
temperature. With air flow, the continuous
current can reach 60A.
•
•
•
4V to 16V Operating Input Range
Maximum 50A Output Current
Supports 60A of Output Current with Air
Flow
Integrated Switch with 1mΩ RDS(ON)
Built-In MOSFET Driver
3.0V LDO Output
Integrated Current Sensing with Sense
Output
•
•
•
•
The MP5921 limits the inrush current to the
load when a circuit card is inserted into a live
backplane power source, thereby limiting the
backplane’s voltage drop. The MP5921 limits
the internal MOSFET current by controlling the
gate voltage through the current limit reference
input and soft-start ramp.
•
Separate Current Sensing Output Used to
Program Over-Current Value
Built-In Insertion Delay
•
•
•
•
•
•
•
Adjustable Soft Start (SS)
Output Short-Circuit Protection (SCP)
Over-Temperature Protection (OTP)
Built-In Fuse Health Reporting
Fault Signal Output
The MP5921 offers many features to simplify
system design. It provides an integrated current
mirror to monitor the output current and on-die
temperature sensing, eliminating the need for
an external current-sense power resistor, power
MOSFET, and thermal sense device.
Parallel
Operation
for
High-Current
Applications
•
•
•
Integrated Intelli-Fuse Temperature Sense
Output Voltage Power-Down Control
Available in a FCQFN-28 (4mmx5mm)
Package
The MP5921 detects the power FET gate,
source, and drain short conditions and can
feedback to the hot-swap controller via the fault
reporting output (GOK). The MP5921 can be
paralleled for higher current applications. All
devices in parallel share current actively during
soft start.
APPLICATIONS
•
•
•
•
•
Hot Swap
PC Cards
Disk Drives
Servers
The MP5921 is available in a QFN-28
(4mmx5mm) package.
Networking
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
registered trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP5921 Rev. 1.1
5/17/2022
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.
1